Search tips
Showing 24 results View by: Thread Post Sort by

  • RE: TUSB213-Q1: Does TUSB213-Q1 have timing requirements for USB signals when powered on

    Hi Yanqing, yanqing liu said: 2, What I mean is that when the Redriver is not powered on, there is a resistance of about 3 Ω between D1P and D2P, and there is also a resistance of about 3 Ω between D1M and D2M; There is no short circuit on the PCB,…

  • TUSB213-Q1: TUSB213-Q1,TUSB217-Q1 CarPlay / Android Auto

    TI Thinks Resolved
    Part Number: TUSB213-Q1 Other Parts Discussed in Thread: TUSB217-Q1 , TUSB216-Q1 , TUSB217A-Q1 Our customer is looking for re-driver for their Automotive USB Charger application to meet CarPlay / Android Auto . Is your recommend IC TUSB213-Q1 and…
    • Answered

  • TUSB213: /TUSB213I/TUSB213-Q1, pin to pin compatible

    Resolved
    Part Number: TUSB213 Are these 3 devices TUSB213//TUSB213I/TUSB213-Q1 drop in replacements to each other (Auto qual and temp range aside)? Are the TUSB213 and TUSB213I similarly transparent to all BC1.2 controller negotiations like the TUSB213-Q1 is…
    • Resolved

  • TUSB213-Q1: Eye diagrams for FS mode

    TI Thinks Resolved
    Part Number: TUSB213-Q1 Hello, My customer would like to see eye diagrams for FS mode. Do you have such ones? Best Regards, Yoshikazu Kawasaki

  • TUSB213-Q1: USB data sharing possible ?

    Part Number: TUSB213-Q1 Other Parts Discussed in Thread: TPS254900-Q1 Hi TI team I have to design an active USB POD that will be connected to an In-Vehicle-Infotainment head unit. You will find attached my first hardware block diagram. The interface…
    • Answered

  • TUSB217-Q1: TUSB213 to TUSB217

    Resolved
    Part Number: TUSB217-Q1 Other Parts Discussed in Thread: TUSB213 , TUSB217 , Hi Sirs, Sorry to bother you. We would like to know 1. What is the voltage set by the AC/DC boost setting parameters for each step? TUSB213 show as below 2. We set…
    • Resolved
    • Answered

  • TUSB217-Q1: How to move TUSB213 to TUSB217

    Resolved
    Part Number: TUSB217-Q1 Other Parts Discussed in Thread: TUSB213 , TUSB217 Dear Team, Customer would like to move TUSB213 to TUSB217. Any key concern or schematic change needed? Thanks Shaq.
    • Resolved
    • Answered

  • TUSB217-Q1: Difference between RX sensitivity of TUSB217 and AC boost of TUSB213

    Resolved
    Part Number: TUSB217-Q1 Other Parts Discussed in Thread: TUSB213 , TUSB217 Hello team, I have a question about TUSB217-Q1 RX sensitivity function. I do not know the difference from AC boost of the similar function in TUSB213. What is the difference…
    • Resolved

  • TUSB217-Q1: Direction of the boost / equalization function

    Part Number: TUSB217-Q1 Other Parts Discussed in Thread: TUSB213-Q1 Hi team, I have two questions about TUSB217-Q1 as below. 1. When I set Boost and RX_SEN level through external resistors, is it valid for both direction? I mean when the data transmission…

  • RE: TUSB215-Q1: D1M, D2M and D1P, D2P pins connection method

    Hi, As mentioned before this is not recommended but maybe workable for this device. Test results (functional and eye diagram) may be different form the typical design. Keep in mind that TUSB215-Q1 and TUSB217-Q1 have some differences. TUSB215-Q1 should…

Didn't find what you are looking for? Post a new question.