Part Number: TUSB320 Tool/software: Hi Team，
I have a few questions to confirm, 1. TUSB320 defaults to UFP mode. If VBUS is not connected by default, can TUSB320 work normally in unattached mode? And can the DFP end function normally? 2. After 10 minutes…
Part Number: TUSB320 Other Parts Discussed in Thread: , ESD441 Tool/software: Hello , for TUSB320 and similar parts, VTH_DFP_CC_USB is listed in the datasheet Rev F as from 1.51V to 1.64V. I also see the default pullup current of 80uA +/- 20%.
If I…
Part Number: TUSB320 Tool/software: Hello：
May I ask if TI's TUSB320 supports the EU new regulation EN IEC 62680-1-3?
Customers need to evaluate and select a TYPE-C control switch that supports the EU new regulation EN IEC 62680-1-3. The chip performance…
Part Number: TUSB320 Other Parts Discussed in Thread: AM6442 , , SK-AM62
Tool/software:
Hi,
We are using the AM6442 SOC in our custom board along with the TUSB320 chip to convert the Type-C CC1/CC2 logic into the ID logic supported by the SOC. …
Part Number: TUSB320 Tool/software: Hi,
I am trying to set a USB OTG system with type C connector.
I would like my OTG device to be charged from an external power.
The device I design includes a USB hub and couple of devices and has an external…
Part Number: TUSB320 Other Parts Discussed in Thread: TUSB321 , Tool/software: Hi,
For my current design, the TUSB320L is configured in GPIO mode (ADDR pin left NC) and as a DRP (PORT pin left NC).
I would like to confirm the following:
1. When…
Part Number: TUSB320 Other Parts Discussed in Thread: TUSB422 Tool/software: Team,
In PV Inverter that has a DEVICE side with TYPE-C application, which is very simple function needed. I don't prefer to add the related circuitry to the PD protocol, in…
Part Number: TUSB320 Tool/software:
What is the max output current of USB TYPEA?
How to set the output current of USB TYPEA?
Is there anyway to set the output current of USB TYPEA below 100mA?
