Part Number: TUSB321AI Other Parts Discussed in Thread: CC2531 , TUSB320LAI Hello TI experts,
My customer considers TUSB321AI for their new product, and they have some questions whether this concept is right or not.
the concept is as below.
-…
Part Number: TUSB321AI Other Parts Discussed in Thread: TUSB542 Previous thread https://e2e.ti.com/support/interface-group/interface/f/interface-forum/1209012/tusb321ai-need-schematic-verification-for-usb-3-1-type-c-circuit?tisearch=e2e-sitesearch&keymatch…
Part Number: TUSB321AI Hello Experts, Would you please explain sequence to detect power role if TUSB321AI in DRP mode is connected to another DRP? Customer would like to know it. The state transition diagram is better to understand the sequence, if you…
Part Number: TUSB321AI Other Parts Discussed in Thread: TUSB321 TUSB321AI and typeC_CN CCpin-connection method.xlsx attached is our TSUB321AI CC pin connection. Are there any problem occur when CC1 pin of TUSB321AI connect Type C CN CC1 pin
Part Number: TUSB321AI We are a CynLr, a Robotics and Machine Vision startup.
We are working on including a USB 3.1 gen 1 5Gbps with Type-C for connecting a camera to PC. We need help in verifying the USB 3.1 portion with Type-C (Circuit in-between…
Part Number: TUSB321AI Hi,
The TUSB321AI datasheet (Revision A) states that "The PORT pin is only sampled at reset or power up."
Please define the reset condition(s).
Regards,
Kwun
Part Number: TUSB321AI Hi Team,
My customer seems have the similar issue to the e2e thread " TUSB321 not detecting cable inversion " but TUSB321AI was used already.
They tried 3pcb and all of these DIR didn't change state at all when either CC1/CC2…
Part Number: TUSB321AI Hi All,
can you please tell if the TUSB321AI is in configure as UFP, and it will try to communicate out the power level that it can consume.
When it detects then he will tell the system through OUT1 and OUT2 the power that…
Part Number: TUSB321AI Hi Experts, If Type-C-A conversion cable is connected to TUSB321AI (TUSB321AI is as DFP), how TUSB321AI will detect a type-c current? It will depend on CURRENT_MODE pin setting? Best Regards, Fujiwara
Part Number: TUSB321AI Hello Experts, I would like to know why RVBUS is specified in datasheet. The datasheet also stated RVBUS=900Kohm/1% resistor required, but there is no 900Kohm in standard value. So I would like to know the reason. If customer choose…
