Part Number: TUSB321AI Hi team. I'd like to know about processing unused pins. My customer want to detect only the front and back of Type-C. So, could you tell me how to handle these pins? VBUS_DET VCONN_FAULT OUT1/2 ID Sincerely. Kengo.
Part Number: TUSB321AI Other Parts Discussed in Thread: TUSB321 , HD3SS3212 , TIDA-01243 Hello,
In the refernce design with tusb321 and HD3SS3212 there is no protection device on usb signals. Is it correct to design such a product without protection…
Part Number: TUSB322I Other Parts Discussed in Thread: TUSB321AI Hi Team,
kindly I kindly know the difference between TUSB322I and TUSB321I?
per quick check the two device function seems the same , if customer ask for CC logic for USB3.2 Gen2 ,…
Part Number: TUSB321AI Other Parts Discussed in Thread: TUSB321 , HD3SS3212 Hi.
My customer is developing cc controller using TUSB321AI and HD3SS3212IRKST.
But the following issues occurred.
1) Operates only in UFP mode 2) Normal operation when…
Part Number: TUSB321AI Other Parts Discussed in Thread: TUSB321 Hi,
Below is the schematic of my TUSB321AI design. I wanted to have someone review it and also let me know if I can NC the VCONN_FAULT, ID and DIR pins when using the device in UFP mode…
Part Number: TUSB321AI Other Parts Discussed in Thread: HD3SS3212 , TUSB321 Hi Team, My customer considers to use TUSB321AI + HD3SS3212 for UFP application. Although the following schematic is for DFP application, is VBUS switch required for UFP application…
Part Number: TUSB321AI Other Parts Discussed in Thread: TUSB320 Hi,
I plan to use the TUSB321AI in a battery charger application. I'd like to power the TUSB321AI on the UFP port with VBUS (VDD = VBUS). Is that possible?
Best,
Matt
