Part Number: TUSB3410UARTPDK Hi
I have one more question added to my series of questions that I am not clear with. I burnt a binary into the EEPROM using the EEPROM burner tool. I get a message that it has succeeded and I needed to unplug and plug…
Part Number: TUSB3410UARTPDK Other Parts Discussed in Thread: TM4C123GH6PM , EK-TM4C123GXL Tool/software: TI C/C++ Compiler Hello guys, i'm using tiva launchpad tm4c123gh6pm and i got a problem. When transmiting data from tiva to virtual COM, and i suddenly…
Part Number: TUSB3410UARTPDK Other Parts Discussed in Thread: TUSB3410 Hi team,
I see that this EVM board has a USB-A interface and a DP-9 interface, signal is transferred from USB to UART. Can we test the eye diagram? If yes, could you please tell…
Other Parts Discussed in Thread: TUSB3410UARTPDK Hi,
We are not able to visit the link provided for Brimson Labs for Third-party Tool Folder TUSB-3P-LNXVCP. It seems like the website is down or the link is broken.
Can you please help to provide us…
Part Number: TUSB3410UARTPDK Other Parts Discussed in Thread: TUSB3410 Hi
I got the TUSB3410UARTPDK kit and installed the EEPROM burner software. I was able to download a 3410_i2c communication binary file to the EEPROM. I pulled the USB plug out…
Part Number: TUSB3410UARTPDK Other Parts Discussed in Thread: TUSB3410 I am trying to download the driver for the TUSB3410, but the exist link from 3410 home page is not valid, which is " http://www.ti.com/general/docs/lit/getliterature.tsp?literatureNumber…
Hello Phong Le,
Sorry for the delay in our reply. The TUSB3410 needs a special firmware to perform I2C transactions through its GPIOs. I will send you the binary file via email.
Regards,
Joel
Other Parts Discussed in Thread: TUSB3410UARTPDKTUSB3410UARTPDK does not work with a loopback plug on the RS232 port.
Have updated the drivers per this other post. http://e2e.ti.com/support/interface/digital_interface/f/130/p/15351/59240.aspx#59240…
Other Parts Discussed in Thread: TUSB3410 , TUSB3410UARTPDK Hi,
I'm not getting the
voltage of 1.8V at the pin VDD1V8 of the TUSB3410. I'm using the TPS79501
regulator instead of TSP76933. Before divider voltage I get voltage of 3.3V, but after…
