Other Parts Discussed in Thread: TUSB3410UARTPDK , TUSB3410 I have downloaded the TUSBWINVCP Software and ran the setup file, but when I plug in my TUSB3410UARTPDK, it is not recognized?
Part Number: TUSB4041I Other Parts Discussed in Thread: TUSB3410UARTPDK I'm having an issue with downstream port enumeration failure for 1 or more ports on Windows 11 only. I do not experience this issue on Windows 10.
The design uses a 12V external…
Other Parts Discussed in Thread: TUSB3410UARTPDK , TUSB3410 , MSP430F5500 Hi team,
Do we have a solution for USB to RS232 conversion IC?
#ch: 1
speed: 125kbsp
Regards,
Ohashi
Hi,
You could use the TUSB3410 EVM, https://www.ti.com/tool/TUSB3410UARTPDK , but the firmware needs to be upgraded to switch it from UART mode to the I2C mode. If you are interested, I can send you the firmware in a private e2e message.
Or you can…
Hi Jatin,
Thank you for posting to the Sensors forum!
It looks like in the thread below someone was having a similar issue to you where the TUSB3410 wasn't able to be assigned a COM port: TUSB3410UARTPDK: TUSB3410 can't be recognized in PC
From…
Hi Enrique,
It looks like in the thread below someone was having a similar issue to you where the TUSB3410 wasn't able to be assigned a COM port: TUSB3410UARTPDK: TUSB3410 can't be recognized in PC
From the thread above, there is a link to a COM Port…
Hi Edward,
1. Yes, if TUSB3410 sees a reset it will look to the EEPROM to reload the FW.
2. Not sure if I understand your question but you will need some reset reset circuit on the RESET pin. This is typically just a 15k pull up to 3.3V and a 1 uF…
Part Number: TUSB3410 Hi,
we are trying to use the TUSB3410 USB to Serial Port Controller.
In the manual we see, that RTS/CTS/DSR/DTR is disabled as standard configuration (FCRL Register 0x00).
But we need this lines in our design.
Also we want…
The TUSB3410UARTPDK needs to have its firmware updated in order to be used with the EyeScan SW. Please accept my friendship request so I can send the firmware to you.
Thanks
David
Hello,
Could you please let me know a few things about your setup?
1. Did the TUSB3410 work before you installed the latest firmware with the EEPROM burner?
2. How are you connecting to the TUSB3410? Are you using our TUSB3410UARTPDK EVM ?
3.…
