Part Number: TUSB4020BPHPEVM Tool/software: Hi,
I’ve been reviewing the TUSB4020BPHPEVM resources on the TI website, but it seems I’m unable to locate any Circuit or PCB design files. Could you kindly share the Altium design files (schematic and layout…
Part Number: TUSB4020BPHPEVM Tool/software: Hello,
I need the layout file of the TUSB4020BPHPEVM.
But I can find the file at the TI Website.
Can you please share the layout file for the TUSB4020BPHPEVM?
The EVM's User Guide explains that you can…
Part Number: TUSB4020BPHPEVM Hello team,
I found out that, there are capacitors and 1Mohm resistor between the connector and GND.
What are the function of those passives? Are they for reducing noise?
Best Regards,
Kei Kuwahara
Part Number: TUSB4020BPHPEVM Hello,
We have a question regarding GRSTZ signal on TUSB4020.
The eval board shows a 1 uF capacitor to GND:
It also goes to a header and has pull-up resistor that is not populated:
I am asking because it is not…
Part Number: TUSB4020BPHPEVM I'm using TUSB4020BPHP Evaluation Module, and I try to use a microcontroller to access to TUSB4020BPHPEVM through SMBus.
I connect the SDA and SCL pins on the EEPROM socket of the board to SMBus (with a microcontroller which…
Part Number: TUSB4020BPHPEVM Hi team,
A customer is evaluating TUSB4020BPHPEVM, he found that if the test is only with USB camera, the test can pass, but if the test is with hub EVM + USB camera, the test is failed.
Please check the reports below…
Part Number: TUSB4020BPHPEVM Hi Sir,
Could you help check attached file (I2C register table) could provide CDP mode?
It could success If we use pin configuration method to set at TUSB4020BPHPEVM. But using EEPROM to set 0x6h, it won't provide CDP…
Part Number: TUSB4020BPHPEVM Other Parts Discussed in Thread: TUSB8041 , TUSB8042A Hello,
We want to develop a 20-40 slot USB hub 2.0 / 3.0 / 3.1 to connect various sensors and USB cameras. In addition, a single USB connection or LAN port should be…
