Part Number: TUSB4041I-Q1 Hello. We are designing testing equipment that requires a 1 to 4 USB High Speed hub. It might be subjected to operating temperatures that exceed the recommended conditions of most TI USB hubs (95C worst case).
Is there any data on…
Part Number: TUSB4041I-Q1
HI,
I developed my pcb with TUSB4041 (it is based on reference design from TI). Unfortunatelly after connecting it to Raspberry Pi Zero W 2 it is not recognized as usb-hub but 'vendor specific class'. To the chip an eeprom is…
Part Number: TUSB4041I-Q1 Other Parts Discussed in Thread: TUSB4041I
Is this 10pf capacitor the capacitance of the entire link or the capacitance inside the transceiver?
Part Number: TUSB4041I-Q1 Team,
Customer would like to know if there's a minimum/maximum value (0.15±?) on our TUSB4041IPAPRQ1 thermal pad corner, marked in red as below figure from datasheet. Could you help to check? Thanks.
Part Number: TUSB4041I-Q1 For an Automotive project we need to add a USB debug and HUB. Please review the schematics and share your comments. Is this the right forum for review, is there any other option for TI,because i cannot share much information related…
Part Number: TUSB4041I-Q1 Hello team,
I am trying to control the down stream VBUS Power.
But I couldn't control the PWRCTRL1_BATEN1 ~ PWRCTRL1_BATEN4.
The symptom is below
1. I use the SMBUS control and first configuration value was (5h/10h , 6h/0Fh…
Part Number: TUSB4041I-Q1 Other Parts Discussed in Thread: TUSB4041I Hello,
I have a custom board with TUSB4041I device, without i2c connected to it. The host is running Ubuntu 18.04.
I would like to disable port 2 of the hub. How it can be done? Is it possible…
Part Number: TUSB4041I-Q1 Hi,
Is there any drop-in alternative for this part?
I have seen in another forum thread that TUSB8041IPAPQ1 could be an alternative, but this part is also hard to source.
Best regards,
/Niklas