Part Number: TUSB522P Hi,
we are laying out a test board for our specialized connector. in testing the TUSB522p, we terminated both rx and tx with 50ohm resistor single-endedly to have an open eye in our testing. questions below
1. the TUSB522p's block…
Part Number: TUSB522PEVM Other Parts Discussed in Thread: TUSB522P We did an experiment today:
200mV differential signal was added to pins 8 and 9 (attempts were made in the frequency range of 1m ~ 20m). The signal was measured on pins 23 and 22, and no…
Part Number: TUSB522PEVM Other Parts Discussed in Thread: TUSB522P Hello,
my customer wants to use this device and has questions:
There are pins 7 and 24, which are in datasheet described as NC (not connected).But in the Evaluation module TUSB522PEVM…
Part Number: TUSB522PEVM Other Parts Discussed in Thread: ESD224 Hi Support,
For TUSB522PEVM, noticed that there are no any ESD protection on the board, so according to our TUSB3.1 (In/Out) connect board,
Do the ESD need to protect ? such as ESD224 for…
Hi,
Since you have USB connector on both ends, you could connect the TUSB522P EVM ( https://www.ti.com/tool/TUSB522PEVM ) and see if it helps with the signal integrity.
Thanks
David
Part Number: TUSB522P Hi,
The schematics connection between host and TUSB522P is different between TUSB522PEVM (SLLU244-August2016) and TUSB522P(SLLSEV9B-July2016-Revised November 2017).
On page 11 of TUSB522P(SLLSEV9B-July2016-Revised November 2017)…
Hi, Brian
Thank you for checking if there are a EVM of TUSB551.
It is helpful for customer even if a EVM is a big size. My hope is your EVM is similar to TUSB522PEVM having USB Type-A and Type-B port.
Can you ship it to me?
Thanks
Tamio