Part Number: TUSB546A-DCI Hi, TI Support Team
I want an HDMi to USB C adapter and I think the TUSB546A fits perfectly. But do I still need a PD controller? If so, which PD controller should I use? and if not, how should I connect CC connectors
Input :…
Part Number: TUSB546A-DCI Hi
Customers found that TYPE-C has an impact on GNSS during testing. It is about 10 dB louder than TYPE-A at the same position. There is this TUSB546A-DCIRNQ in the review line, which may affect it. I would like to ask if there…
Part Number: TUSB546A-DCI Other Parts Discussed in Thread: TPS65987D , TPS65987
Hi there,
I've finished designing my USB-C PD/DisplayPort setup with the TUSB546 as the redriver mux and TPS65987D as the PD controller. I'd love to get someone else to take…
Part Number: TUSB546A-DCI Other Parts Discussed in Thread: TPS65988 , TUSB564 Hello, I want to use TUSB546A with MCU over I2C. I want to get mux parameter from TPS65988 to TUSB546A by MCU. Which parameter I must get from TPS65988.
Part Number: TUSB546A-DCI Other Parts Discussed in Thread: TPS65988 , Hi, I want to program TUSB546A using MCU. MCU will be a bridge between TPS65988 PD Controller, TUSB546A. I do not fully understand which register I must read from PD controller.
What…
Other Parts Discussed in Thread: TUSB546A-DCI , TPS65987D Hi all,
we're currently working to build or own HDMI to USB C (with display port) converter. In particular, we have a HDMI source which will be connected to the converter and a monitor that will…
Part Number: TPS65987D Other Parts Discussed in Thread: TUSB546A-DCI , TPS25750 I am designing a carrier board for the Raspberry Pi CM4, which will have a USB C connector. It is planned for it to be a DFP data-wise, but a DRP power-wise, which accepts 5…
Part Number: TUSB546A-DCI Hi to all,
To solve a problem in my design, I come across TI's TUSB546AI-DCI IC,
The Problem:
Using Type-C receptacle to transfer Video, Audio & Data.
The SoM platform I'm using has USB 3.0 & HSMI 2.0 PHY, I am trying…
Thanks Kanishka,
Kanishkavikram Purohit said: DP Status To Plug field mentions that "DP functionality is disabled".
That does not seem correct, and I'll verify this on my end to see if I can replicate it.
Is there anything on the HPD line…
Part Number: TUSB546A-DCI Hi,
During booting, the processor is sending command through the AUX channel to retrieve the EDID data from the monitor but failed.
Looking at the DC bias of the SBU1(pin27) (see waveform) and AUXP(pin24) of the TUSB546A seems…