Part Number: TUSB8041EVM I would like to disable the spread spectrum on this board.
As the EEPROM can be programmed using the TI utility over USB.
Could you please mail the utility.
Best,
Srinivas.
Other Parts Discussed in Thread: TUSB8041EVM Please verify the correct part number, center pin and outer pin diameter for the J6 mounted on the TUSB8041EVM.
The EVM (page 7) lists J1 as PJ-202AH 2.1mm x 5.5mm power jack.
The CUI datasheet shows that the…
Part Number: TUSB8041EVM Other Parts Discussed in Thread: TUSB8040 , , TUSB8041 Hi,
Where can i get the EEPROM utility mentioned in the TUSB8041RGC REVD Evaluation Module User guide.
Thanks,
Jagadeesh
Hello Brian
I soldered thermal pad to ground.
And schematic is same as TUSB8041EVM.
I orderd from PlanBnet, which is on of the electronic part distributor in Korea.
I made 10 PCBs and all of them have same problem.
Regards,
Wonhwi.
Hi Brian and other who may pay attention
I used the same TUSB8041 circuit to independently make a HUB PCB for testing, the hub test is OK, USB3.0 and USB 2.0 work fine. So TUSB8041 chip and TUSB8041EVM circuit is OK, it works. There is a problem with my…
Part Number: TUSB8041
Dear Sir/Madam,
I am designing board (AiC card) using TI part : TUSB8041.
Regarding Board ESD Protection through Connector Chassis Body, I have done USB3.0 Connector Chassis connection as per TI Reference Design ( www.ti.com/...…
Part Number: TUSB8041A Other Parts Discussed in Thread: TUSB8041EVM
Hi Team,
Do we have the reference sch & layout of TUSB8041A for customer to reference?
I checked the other E2E post , and looks like that customer can reference TUSB8041EVM's sch&layout…
Part Number: TUSB8044RGCEVM Other Parts Discussed in Thread: TUSB8044AEVM , TUSB8040 , TUSB8044 , TUSB8041EVM Hi E2E,
Good day!
I just want to know if TUSB8044RGCEVM can be used for Windows HLK test. If not, can you suggest any boards that can be used for…
Hi Darren,
1. TUSB8041EVM was the same board / silicon that was verified in our lab and also sent to a 3rd party test house for USB-IF compliance testing. It should pass EL-17 without issue. I will send you a direct email so you can send the waveforms…