Part Number: TUSB8041A Tool/software: Hello,
I am looking for a USB hub controller and came across the TUSB804xA range. I tried to find any differences between the modules, but I don't think there are any. Even the TI comparator does not provide any…
Part Number: TUSB8043A Other Parts Discussed in Thread: HD3SS3220 Greetings,
We are using your TUSB8043A hub with the HD3SS3220 port controller. I am not clear on how we set the hub up to auto detect the USBC direction. The hub is keeping power (VBUS…
Part Number: TUSB8043A In TUSB8043AIRGCR datasheet, it is mentioned to use 1.8V clock signal for input clock in XI pin of USB hub. but the ViH value for 1.8V clock signal / I/o signal is not mentioned.
The vih value mentioned in the datasheet is only…
Part Number: TUSB8043A Hi TI Teams:
Our device usb TUSB8043A hub to connect USB camera,
But sometimes, getting a video stream from the usb camera fails. We analyzed the kernel log, the usb driver reported -71 (protocol error), and finally we located…
Part Number: TUSB8043A Tool/software: Hello team,
I am only going to use this part for USB2.0.
What should I do with the unused pins of USB_SSTXP_xx / USB_SSTXM_xx / USB_SSRXP_xx / USB_SSRXM_xx?
Should I open or GND them?
Best Regards, Kei Ku…
Part Number: TUSB8043A We are using the TUSB8043A in our control board and the board also has the PIC18F47j53 in the design (it does not have external EEPROM). The issue we are facing is putting the unique serial number for each of these boards.
So…
Part Number: TUSB8043A Hello team,
My customer would like to use this device without any EEPROM or I2C/SMBus connection.
Is this device going to operate stand-alone, if the customer only use default register setting?
Best Regards, Kei Kuwahara
Part Number: TUSB8043A Hello team,
My customer wants to know if they should use 2* 10uF cap or 1* 10uF cap for the power rails.
On the datasheet 9.2.1.2.8 shows 1* 10uF for each power rails.
Meanwhile on EVM, 2* 10uF is used on 1.1V rail.
…
Part Number: TUSB8043A Other Parts Discussed in Thread: TUSB8044A Hello there,
In our project, we are using 4 port USB 3.0 part no. "TUSB8043RGCR," but since it is not available, we come across the alternate part "TUSB8043AIRGCT." Could you please…
