Part Number: TVP7002 Dears,
As shown in the figure below, the description of embedded synchronization signals in the data manual is not supported when it is 30 bits.I would like to inquire if embedded data is supported for Yuv444 format data with 24 bit…
Part Number: TVP7002 Hello TI: we connected VGA port of a PC to TVP7002. The HSYNC input at HSYNC_A pin of TVP7002 was as the following figure, but Sync Detect Status register showed there is no hsync detected.
We set register 0x1A to use HSYNC_A, and…
Part Number: TVP7002 Hi Team,
One customer uses TVP7002, Ypbpr input and YCrCb4:4:4 output. 1280x720P@50Hz. H e only uses the Y output. According to the demo configuration output, there is a black border on the left and a line of snow flakes on the bottom…
Part Number: TVP7002 Hello TI,
I am working on one application where I require to make HW to convert one channel VGA input video to MIPI CSI-2.
I have selected TVP7002 to convert VGA video input to parallel output port. Now I want to use TC358748 from…
Part Number: TVP7002 Hello,
One customer used TVP7002, Ypbpr input and YCrCb4:4:4 output, he only used the Y output, but the display is green and pink instead of black and white, why? How to configure?
Best regards
Kailyn
Part Number: TVP7002 Other Parts Discussed in Thread: TFP410 , Hi team
Are there any solutions for VGA to DVI(SXGA(1280 x 1024)) bridge instead of TVP7002 + TFP410?
TVP7002 is not supported anymore. So please let me know alternative solutions.
Regards,
…
Part Number: TVP7002 I used ISL98001CQZ-170 before, now I want to use TVP7002 to replace it, but the official website shows that it is not suitable, can I still use it? Or what do you recommend?
Thank you very much!
Part Number: TVP7002 Hi,
I have a problem when using tvp7002 to decode VGA video. The input VGA video is 1024*768@60Hz, and output data format is RGB 444. The external clock is 27MHz,and the output data clock is 65MHz.
But now I have two questions:…
Part Number: TVP7002 Hello,
TVP7002 support 20bit YCbCr 4:2:2 output, but our customer need to connect Hisilicon 3531D which need 16data+1 clock input, so how to connect TVP7002 with 3531D? In addition, BT.1120 is 20bit wide or 16bit wide? Below picture…