Part Number: TWL1200-Q1 Other Parts Discussed in Thread: TWL1200 Hi Team.
The IBIS Model of TWL1200 is only for BGA available. Could you also provide the IBIS Model of TWL1200-Q1 in TQFP Package?
Many Thanks,
Stefan
Hello,
In the future, please start a new thread for new questions -- we like to keep these separate to help people find what they're looking for faster and easier when searching. If you want to link to the original thread, there's a "+ Ask a related…
Hi Santhosh,
TXS is generic bidirectional translation device which will work for open drain interface as well as push pull (not ideal).
The TWL1200 is application specific device meant for SD, UART, Audio applications.
Internally, the IO line's architecture…
Hi Yifan,
It seems that the TWL1200 would be an overkill for your application which would need only SDIO interface.
TWL has 19bit translation and is an application specific device for Audio, SD, UART interface.
You could consider using the sn74avca406l…
Hi,
We are closing this post due to inactivity. Please feel free to post again if you have any other questions. We now have a goal of responding within 24 hours to any new post.
Regards,
Emrys
Part Number: TWL1200-Q1 Hi,
We are looking to interface the WL1837MOD which has 1.8V SDIO lines to our 3.3V IO lines on the AM4376 . Looking on page 4 of this report for level shifting the WL1837MOD IOs: http://www.ti.com/lit/an/swra448a/swra448a.pdf…
Thank you for your answer. I am also looking for the option to eliminate the need of the external 32K osc, and to level shift the SoCs' 3.3V GPIO 32K output. This information is missing from the provided article.
Thanks
■Question
①Could you advice about the reason to become such a dull waveform in waveform1 and solution?
This is, as previously stated, due to a heavy loading. The edges are e-function shapes. As suggested, remove the series resistors and accept a little…
I check WL1835 datasheet. BT_HCI_TX_1V8 is output signal and BT_HCI_RX_1V8 is input signal. As for TWL1200, BT_UART_RX(B) is output signal and BT_UART_TX(B) is input signal. Thus, BT_HCI_TX_1V8 should be connected to BT_UART_TX(B) and BT_HCI_RX_1V8 should…
