Hi Igor,
We have one TX solution (TX517), and one T/R switch (TX810) in addition to our AFE58xx devices. Panametric's 5900PR is also another option you can explore regarding testing ultrasonic transducers.
Sincerely,
Olu
Other Parts Discussed in Thread: TX810 Hi i m using 2 ultrasonic transducer that is capacitive based one for transmitting and the other for receiving. The transmitting signal is AC pulse at 5Vpp , 17MHz with DC bais of 60 V. This transmitted signal is…
Part Number: TSW1400EVM Other Parts Discussed in Thread: TX517 , TX810 Hello team,
I'm looking to design an ultrasound imaging system with the below signal chain
TX517 -> TX810 -> Transducer -> AFE58xx -> TSW1400 -> Post processing -> Display
Please…
Part Number: TX517EVM Other Parts Discussed in Thread: AFE5809EVM , , TX810 , TX517 Hi,
We have made a fully functional sonar system using the following EVMs:
TX517EVM -> Transducer -> TX810EVM -> AFE5809EVM -> TSW1400EVM
Here is a photo of our…
Hi Muhammad,
The signal chain would be TX517 -> xdcr -> TX810-> AFE5807->TSW1250.
I suggest trying to get data with AFE5807+TSW1250 first.
Next, connect the TX517 output to an oscilloscope (THROUGH AN ATTENUATOR). DO NOT PLUG the TX517 directly…
Other Parts Discussed in Thread: TINA-TI , TX810 Hi , i am trying to simulate TX810 with AD8334 as shown in page 9 figure 13 using TINA-TI.
The output of the TX810 is given as a input to AD8334 which is LNA amplifier. But i couldnt get the TINA-ti spice…
Hi Friday,
1) We use BAS40 as the Schottky diodes
2) When you transmit, you should closed s1. When you receive, you should open s1. Also make sure your bridge diodes can handle the transmit voltage levels. If 5K ohms resistors are loading your transmitter…
Silvio,
Yes, TX734 was phased out and at this time our team only has the TX517 transmitter and TX810 T/R Switch. Otherwise, I would have to suggest TX-SDK-V1 parts.
Chuck
Hi Jay,
We don't recommend new designs with the LM96570. The SONAR reference design is a good starting point for the RX.
You can look at the TX810 and TX517 for T/R switch and TX respectively. Unfortunately, there are no designs available for the…
Hello KH,
For the Analog Front end, we recommend AFE5808A over the LM96511 and for the T/R switch, TX810 over the LM96530.
Unfortunately we don't have any recommendations for LM96550 (Pulsar) and LM96570 (Tx beamformer).
Please send me an email…
