Part Number: TXB0104 Other Parts Discussed in Thread: TXU0304 Tool/software: Hello,
In my system I need to scale down SPI signal and TXB0104 seems to be ticking a lot of boxes, including cost. The caveat here is that it needs to do it in almost back to…
Part Number: TXB0104-Q1 Tool/software: Hi TI Expert,
Quite confused about the package info of the TXB0104QRUTRQ1 .
Does that means we extend the pad to the package side like wettable flank?
Like we have conductive pad on each side so it's easier for checking…
Part Number: TXB0104-Q1 Other Parts Discussed in Thread: TXU0104-Q1 , TXB0104
Tool/software:
Hi Expert,
My customer Li-Auto is using this device for level shifting between MCU and SoC in IVI platform. Below is the simplified diagram and schematic:
(BTB…
Part Number: TXB0104-Q1 Tool/software: Hi Ti Team,
Please provide below mentioned part numbers Failure modes details.
1. TXB0104QRUTRQ1
Thanks
Regards,
Silambarasan
Part Number: TXB0104-Q1 Tool/software: In our application, VCCA will only be powered ON after VCCB has been powered on. Will this cause any functional impact, such as device failure
Part Number: TXB0104-Q1 Tool/software: We have a situation where VCCA will always be present and VCCB will not be. In that situation, will there be any functional impact on the chip, such as device damage?
Part Number: TXB0104 Tool/software: The current material is 2 years old. From the pictures, it appears that the 12 pieces of sample material have yellowish stains. From the specifications sheet of this material, the coating is NIPDAUAG treated, which…
Part Number: TXB0104 Tool/software: Hi team,
ASUS is verify our TXB0104 for their application.
The customer would like to have a preliminary slides or doc of Translator's functions, working principles, applications, etc.
Do you have any relevant information…
Part Number: TXB0104-Q1 Tool/software: chapter 8.3.3 Output Load Considerations says : " PCB signal trace-lengths should be kept short enough such that the round trip delay of any reflection is less than the one-shot duration. This improves signal…
Part Number: TXB0104 Tool/software: We would like to use two TXB0104RUTR as SPI signals buffer because the traces are too long.
My question is the datasheet mentions the "Maximum data rate" is 60 Mbps, does it need to div 4 to get 15Mhz for support single…