Part Number: TXS0102 Hello,
I would like to use the TXS0102 level shifter as selector via its OE input as described in the diagram below :
To read peripheral 1, OE_2, OE_3 and OE_4 are disabled and OE_1 is enabled and so on for other peripherals. Only…
Part Number: TXS0102 For the TXS102, the datasheet says, "The output-enable (OE) input circuit is designed so that it is supplied by VCCA." If my VCCA = 2.5V and VCCB = 3.3V, is it OK to tie OE pin to VCCB?
Part Number: TXS0102 Hello,
I would like to use TXS0102 in the package VSSOP, so in TXS0102DCU but I don't find any information about TXS0102DCU T and TXS0102DCU R .
The DCUR version seems cheaper than DCUT version but why ?
Furthermore, what does G4…
Part Number: TXS0102-Q1 Hi Expert,
If TXS0102QDCURQ1 OE pin pull low, then A1 and B1 are disconnect and at this moment if signal at A1 been pull low, B1 will keep it voltage level instead of follow A1 that been pull low, is it correct?
Thanks.
Best Regards…
Part Number: TXS0102 Hi ;
I am using a TXS0102 level shifter in a MDIO line for shifting +1V8 CPU MDIO and +2V5 PHY MDIO. But sometimes i am encountering accessing issues so i have checked the waveforms and I did not observe any problems. However, I saw…
Part Number: TXS0102 hi,
In Page 1 of TXS0102 datasheet, "1.65 V to 3.6 V on A port and 2.3 V to 5.5 V on B port (VCCA<=VCCB)" is found.
1. both GND pins of VCCA and VCCB are directly connected together, if VCCA=VCCB, TXS0102 can work…
Part Number: TXS0102-Q1 Dear TI experts,
My customer drew their first schematic with TXS0102-Q1. Could you review this schematic?
And here are additional questions ;
1. Is it okay to leave floating unused pins? (A2 and B2 - They use only 1 channel.) …
Part Number: TXS0102 Hi,
I used an TXS0102 to interface a GPS device with logic voltage at 2.8V with an host uC at 3.3V. I2C clock signal is ok and the 2.8V converted signal is also ok however I2C data line is not pulled low and that only happens if I have…
Part Number: TXS0102 Hi,
Do we have the max capacitive load these two translators can support?
From the datasheet and apps note, it never specified an absolute number.
https://www.ti.com/lit/an/scea044/scea044.pdf?ts=1694158703316&ref_url=https%253A…
Part Number: TXS0102 Hi, I have a system that has 4x TXS0102 parts for 8 I/O signals
VCCA = 1.8v VCCB = 5v (Both shared between all parts)
OE = tied to VCCA
There are 3 different conditions being used: Input: A is Hi-Z FPGA input, and B is driven by other…