Search tips
Showing 9 results View by: Thread Post Sort by

  • TXS0206-29: Help to check TXS0206-29 package dimension details

    TI Thinks Resolved
    Part Number: TXS0206-29 Hi Team, Help to check the dimension size in data sheet P.24. Will it be ok if customer use 1.558 mm for E? =(1.588+1.528)/2. Per customer feedback, the CAD limitation would be down to 3rd digits after decimal. it would be an issue…
    • Answered

  • TXS0206-29: Finding UHS-I compliant voltage level translator for SD card

    Resolved
    Part Number: TXS0206-29 Other Parts Discussed in Thread: SN74AXC2T45 , SN74AXC4T774 Hello, I need an SD 3.0 compliant voltage level translator that can convert 3.3V signals from my processor to 1.8V signals for an SD card so that I can run UHS-I type cards…
    • Resolved

  • TXS0206-29: About 2.9V LDO

    TI Thinks Resolved
    Part Number: TXS0206-29 Hi, Could you tell me about TXS0206-29 internal LDO out put voltage? Please tell me why LDO is set to 2.9V. The standard of the SD Card Association is basically 2.7 to 3.6 V. Therefore, customers questioned it. Best Regards, Yusuke…

  • TXS0206-29 - Vbatt connection for non battery powered application

    Other Parts Discussed in Thread: TXS0206-29 , TXS0206 We have a question concerning the power connections of the TXS0206-29 chip (SD-CARD interfacing); where not sure how to connect the VBatt power pin (B2). The datasheet says on page 3 that VBatt is the…

  • RE: SN74AXCH8T245: data rate for Vcca = 1.8V and Vccb = 3.3V

    Hi Dylan, I am looking for something like http://www.ti.com/product/txs0206-29 Best Regards, Hans

  • Level shift question for SD card device.

    TI Thinks Resolved
    Other Parts Discussed in Thread: LSF0108 , TXS0206 , TXS0206-29 , TXS0206A Our customer choose LSF0108 for SD card application, because the datasheet has SDIO application. But when testing, they found the waveform of 3.3V SD_CLK is not good enough. Like picture…

  • TXB0108 pull-up and pull-down resistor

    Other Parts Discussed in Thread: TXB0108 , TXS0206A , TXS0206-29 Hi, On the TXB0108, can I use both pull-up and pull-down resistor like below? Best Regards, Hide

  • TXB v/s TXS selection

    Other Parts Discussed in Thread: TXB0104 , TXS0206-29 , TXS0206A Hi, We're designing an interface card (shield) for the Raspberry-Pi (Broadcom BCM2835 ARM processor). Our shield is based on the Atmel ATMega processor (ATMega328P). We will have two communication…
    • Answered

  • [FAQ] [H] Voltage Translators - Top Questions Resolved

    Resolved
    Quickly find solutions to common questions about voltage translation (level shifter) devices by clicking this link. This FAQ answers the most common questions asked about these devices …… ……… … Use Cases &…
    • Resolved

Didn't find what you are looking for? Post a new question.