If the customer is looking for a voltage translator, we have a wide variety available. Can you help us to narrow down their requirements?
The TXS02612 has 6 lines of translation, 5 of which are bidirectional (data goes both ways on the wire) and 1…
Part Number: TXS02612 Hello,
I would like to ask a question for power-off sequence.
Is there any power-off sequence standard for TXS02612?
The reason why I am asking is that there is no comment for power-off sequence on the datasheet.
Hey Jason,
I would use the Channel to Clock skew spec as this will give the the difference between each output transitioning if their inputs were transitioned at the same time. The propagation delay spec typ value may be a little off based on the…
Part Number: TXS02612 Hi Sirs,
Sorry to bother you.
Does TXS02612RTWR had released layout guide?
If yes could you help provide it?
Because we want to confirm if there any suggestion SDIO trace length should be under than how many mil??
Thanks…
Part Number: TXS02612 Hi All,
we are facing an issue with FPGA and SD-card slot using TXS02612 to translate from FPGA voltage level(2.5V) to SD card voltage level(3.3V).
We developed and succesfully tested several prototypes using your device (same…
TanQ for your Reply
in one side, I have a xilinx Zynq7020 that it is a SoC chip consist of two Cortex-A9 processor and a ARTIX7 FPGA in one package.
it has two SD peripherals that they work with 1.8V supply.
I already connect one of them to a SD…
Part Number: TXS02612
hello sir
Please check as below inquire.
When applying the TXS02612R part below, Some SD cards are not recognized.
Removing TXS02612R and connecting it to SD1 Port will work well.
I would like to ask you to check if there…
Part Number: TXS02612
Hi Team,
my customer is searching for an 4bit SDIO level shifter with expander solution,
now they are consider TXS02612 , and seems this device is a good fit.
could you kindly help to check if this device suitable or not…
Part Number: TXS02612 Dear TI Experts,
My customer are debugging TXS02612 for accessing TF card, and find abnormal 2 level voltage level on CMD line, seems one is 1.8V and the other is 3.3V. This issue existed in all TXS02612 boards at all time
They…
Part Number: TXS02612 Hi team,
The customer observed access error to SD card when 1.2V/4ns noise has just come to DAT0B0. At the access error, DAT0A level was 3.3V in spite of being expected low level. We think the one-shot circuit inside works around…
