Other Parts Discussed in Thread: TXS02612 Hello,
My customer will use TXS02612 for new project and is asking about input level.
According to datasheet (page6), VIH and VIL(A port) are as following.
(A port) VIH ＝VCCI - 0.2V(min) 、 VIL=0.15V(max…
Other Parts Discussed in Thread: TXS02612 , TXS0102 Hi,
My cusotmer is using TXS02612. Can TXS02612 be used as IIC level translator?
Best regards, Shimizu
Part Number: TXS02612
Hello team,
Hope you are well. Customer is requesting to get me some clarification on the VILmax and VIHmin spec’s for the following parts?
TXS0108E
TXS02612
Both of these parts appear to have extremely tight input spec…
Hi,
We are closing this post due to inactivity. Please feel free to post again if you have any other questions. We now have a goal of responding within 24 hours to any new post.
Regards,
Emrys
Other Parts Discussed in Thread: TXS02612 I am having issues with the TXS02612 and a SD Card. The setup is the following:
We developed a CPU module with Freescale CPU, TXS02612 and a eMMC. The Module is placed in a Mainboard/Baseboard which has an…
Part Number: TXS02612
Hi,
For TXS02612, I have provided a jumper option for select pin. Can I hotswap SDcard by not selecting the port B1 by SEL pin?
Do I need to disable the power to port B1 while hotswapping? Schematics is given below…
Other Parts Discussed in Thread: TXS02612 Hi
I would like to know on resistance value of internal FET between A-port and Bx-port in TXS02612.
(A-port of customer' circuit is 3.3V and Bx-port is 1.5V)
Best regards,
Mitsuo
Michelle,
For your application, you can leave the DATxx1 pins floating (they will be terminated to VCCB1 via an internal 70kohm pullup resistor) and ground the SEL pin since the SDIO peripheral path is never needed.
Best Regards,
Nirav
Hello,
We unfortunately do not have an EVM available for these devices.
We understand that this post has been open for some time, but we are trying to clear unanswered posts from these forums.
I am going to close this post due to its age.
Best…
Other Parts Discussed in Thread: TXS02612 Hello,
My customer is asking about high/low level(A/B-port) in TXS02612.
(1) About High/Low level of input port, (datasheet page6)
High level Min : VCCI-0.2V Max : VCCI
This is meaning that we need…
