Part Number: UCC256303 Other Parts Discussed in Thread: UCC27519 Hi,
I hope now the pictures are added.
I am developing an insulated DC-DC converter using UCC256303 QR controller.
Two UCC27519 are inserted between the UCC256303 high side gate and…
Part Number: UCC256303 Other Parts Discussed in Thread: UCC27519 Hi,
I am developing an insulated DC-DC converter using UCC256303 QR controller.
Two UCC27519 are inserted between the UCC256303 high side gate and low side gate wires and the MOSFET…
Hi Mit,
This is an older driver therefore we do not have simulations available for this device. However depending on specific features, I can maybe interest you in an optimized driver with simulation models readily available.
Below is similar driver…
Hello Mosi,
In many respects, the UCC27511 and UCC27519 do have similar parameters regarding driver current and Vdd operating range.
A couple of points I notice on the UCC27519 is that It is pin compatible with the TPS2828 and TP2829 which would be…
Hi Ville,
The UVLO circuitry may not put the device into a low-power state. For example, it pulls the gate of the mosfet low, so this will result in some current consumption.
If you need an enable pin, I suggest you look at one of our products that…
Hi Woon,
Thanks for reaching out!
-------
Our LMG1020 can provide 0.4 ns typical rise and fall times (100pF load), BUT is limited to a 5V VDD... (If you can deal with the 5V limitation, this is the best choice)
It also has our smallest propagation…
Hello Annais,
Welcome to e2e and Thank you for your interest in our driver, my name is Mamadou Diallo from the High Power Drivers' team.
Our current portfolio are not equipped with an OVLO protection.
I also want to clarify few items:
1. The Absolute…
Hi Nandha,
Thanks for your interest in our driver, my name is Mamadou Diallo, I will help address your questions.
UCx710 is one of our older low-side driver, depending on specific features of interest, I can maybe suggest our latest and most optimized…
Hello
I have the same problem with the UCC27519
http://www.ti.com/product/ucc27519?qgpn=ucc27519
Would it be possible to convert the model in TINA-TI?
Thanks in advance
Andreas
Hey Chase,
Thank you for reaching out to TI with your questions regarding the UCC27519A-Q1.
Please see the attached Schematic Review Template for reference.
3364.UCC27518_9 Schematic Review Template.xlsx
Here are a few notes:
1. The EN pin can…
