Part Number: UCC28C43-EP In continuation to previous query:
UCC28C43-EP: Higher Output Voltage Ripple - Power management forum - Power management - TI E2E support forums
Sense resistor is updated to available 600mohm as suggested.
Below are the…
Part Number: UCC28C43-EP Hello John,
In continuation to our previous query:
UCC28C43-EP: UCC28C43-EP: Higher Output Voltage Ripple - Power management forum - Power management - TI E2E support forums
Sense resistor was reduced to 400mohm , around…
Part Number: UCC28C43-EP Hello,
I have addressed the query in below e2e, but i do not see response. Could you please help address the query.
https://urldefense.us/v2/url?u=https-3A__e2e.ti.com_support_power-2Dmanagement-2Dgroup_power-2Dmanagement_f_power…
Part Number: UCC28C43-EP Hello,
We are using UCC28C43MDREP in our design.
Input voltage range : 180V - 320V , Switching frequency : 100kHz
Output voltage1 - 15V , Max Load Current - 0.5A
Output Voltage 2 - 20V_ISO , Max Load Current - 0…
Part Number: UCC28C43-EP Tool/software: Hello,
Can i know the process technology/Wafer technology of the above mentioned Part number(UCC28C43MDREP)for our critical aerospace applications, our client required to provide these data . thank you
Part Number: UCC28C43-EP Other Parts Discussed in Thread: UCC28C42
Hello everyone,
Can someone tell me what is the difference between UCC28C42 and its EP version?
Can I safely interchange those two in already on-market products?
Part Number: UCC28C43-EP I chose to model the ucc28c43-ep's oscillator with a PSIM model of the ucc3842 (see attached file).
I sought out information about the current source value and the two treshold values for the ucc28c43-ep but I could not find…
Part Number: UCC28C43-EP Other Parts Discussed in Thread: TL431 Tool/software: WEBENCH® Design Tools Flyback 33V 2.6A TI.TSC WBDesign 33V Flyback.pdf I have a web bench design for a 75V to 395V DC input and output of 33V@2.6A with opto feedback DCM
…
We did. Device is still damaged after short circuit in UCC28C43-EP. After replacing UCC28C43-EP device is in good condition again.
We repeated it 4 times.
The procedure is as follows: - we freeze our device in the cold chamber for 2 hours with no…
Part Number: UCC28C43-EP Оur device worked without problems when we used UCC28C43DR. We are use UCC28C43MDREP now PWM controller is burn. The VDD and GND pins are getting shorted.
