Part Number: USB-CTM-MINIDK-EVM I have ordered a total of 6 of the USB-CTM-MINIDK-EVM part, but are having issues with two of them. On one of the PCB boards when something is plugged into to HDMI port the screen that is supposed to be projecting the image…
Hi Alessandro,
We provided steps to flash the EVM and ensured those steps were working with the same hardware. Unfortunately, something is causing the flashing to fail on your end. At this point, we don't have any other recommendations to flash the EVM…
Part Number: USB-CTM-MINIDK-EVM Hello,
We just received the USB-CTM-MINIDK-EVM, and neither the audio nor the video capabilities are working...The LEDs seem to work properly and we are able to transfer files bewteen the front USB-C receptacle and the…
Part Number: USB-REDRIVER-EVM Other Parts Discussed in Thread: TUSB501 , TUSB211 , TUSB211A Hi,
I am looking to design my own USB3.0 redriver for our application. I have tried out the INT038 USB-REDRIVER-EVM and it works well in our system.
However, the…
Part Number: USB-CTM-MINIDK-EVM Hi,
I would like to use an USB-CTM-MINIDK-EVM in my project configure to Sink / DFP mode connected to my custom board configure to Src/UFP mode.
My custom board use a buck boost controler to deliver VBUS (5V) and a stsub1702…
Part Number: MMWCAS-DSP-EVM Tool/software: Hi MMWCAS Champ !
My customer purchased MMWCAS-DSP-EVM and MMWCAS_RF-EVM.
They tried to setup the Cascaded Demo Setup following the mmWave Studio Cascade user guide introduced in MMWAVE STUDIO_2.1.0.0.
https…
Part Number: USB-PD-CHG-EVM-01 Other Parts Discussed in Thread: TPS25750 , BQ25798 , TPS25751 Tool/software:
I want to use the schematic of this evaluation board for my device, which is battery-powered. I plan to use these two chips(BQ25798 and TPS25750…
Hi Jim,
Please check the uboot patch in the link below.
https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1347070/sk-am64b-am64x-dfu-and-uart-initialization-procedure/5203158#5203158
Part Number: PROCESSOR-SDK-AM62X Tool/software: Hi,
We would like to know whether We can configure EVM Board( AM62B-P1) as Host device for USB. Kindly Confirm. If Yes could you please let me know the process to do the same. Our intension is to have file…