Part Number: USB-TO-GPIO2 I am trying to interface the USB-TO-GPIO2 with my PCB but am struggling to find information on the connector for the 10-pin ribbon. What is the PN of the connector and/or it's compatible mates. Additionally, can you confirm that…
Part Number: USB-TO-GPIO2 Other Parts Discussed in Thread: UNIFLASH Hello,
I have a TI USB-TO-GPIO2 programmer that appears to be stuck on firmware version v0.255.0.
When detected by TI Fusion Digital Power Designer 7.10.x to 7.12 (latest), it dentifies…
Part Number: USB-TO-GPIO2 Other Parts Discussed in Thread: UCD3138A Hello
I am currently using a USB-TO-GPIO device with fusion digital power designer 7.0.18. my question is are we able to use the same softwear version on the USB-TO-GPIO2? Are there…
Part Number: USB-TO-GPIO2 Hello E2E Experts,
I am having a hard time finding anything about bus speeds and the pullup resistors.
Is it possible to control these in command lines or some other type of automation tool?
Regards,
TICSC
Part Number: USB-TO-GPIO2 Previously purchased devices with the same model code can all transmit data normally, but the most recently purchased unit fails to do so
Part Number: USB-TO-GPIO2 Hi BU,
Good day!
My customer is using USB-TO-GPIO2 to pair with their digital power supply. They have 2 questions below:
Can advise maximum recommended cable length from TI adapter to power supply?
User guide to do…
Part Number: USB-TO-GPIO2 Customer observed out of 4 nos 1 unit is not detecting /operating and error message as attached .
Please try to fix at earliest..
Error screenshot –
Part Number: USB-TO-GPIO2 Tool/software:
Hi
During the use of this product, we found that the IIC signal could not be detected. Could you please help confirm what the cause is and how to solve it thank you
Hi Alan,
There is no backwards compatibility between the USB-TO-GPIO2 and USB-TO-GPIO. The Fusion Digital Power Designer software had to be updated to support the detection of the USB-TO-GPIO2 adapter.
Ben needs to know which adapter is recommended…