Part Number: XIO2001 Hello,
it seems that the XIO2001 requires a (single-ended) 125 MHz reference clock when used in a PCI Express Separate Refclk Architecture?
Am I getting it right: when the other/remote port device (e.g. a PCI Express Switch) requires…
Part Number: XIO2001 Hi Team,
Please tell me about the XIO2001.
In our design, Voltage from the PCI Device A leaks into the PCI pin while Power-on.
Is the following waveform acceptable?
Best Regards,
Kitagawa
Thank you for your answer. Let me summarize the question once. On a customer's system, PCIe access may freeze at a rate of 1 in thousands of times during power-up, and upon examination, we find that the MABORT bit in XIO2001 is set to 1. Looking at the…
Part Number: XIO2001 Hello all,
Recently I received a task to redesign an old design that used PEX8311 from Broadcom for the bridge of multiple PCI to Generic Local Bus peripherals. While searching for direct replacement of the PEX8311, which has become…
HI Wekumura-san,
We have not seen this issue before, nor have I been able to reproduce it. I will have to continue to review to consider it for the errata at this time.
Best, David
Part Number: XIO2001 Dear Technical Support Team,
When PCI 64bit access (wired up to 32 bits as a circuit) is performed,
When an access that does not meet the alignment is made (Read only), cycle from XIO2001ZWS (PCI initiator side) is not the intended…
Part Number: XIO2001 Hi, TI experts
I have an inquiry about the differences between XIO2001ZWS and XIO2001ZGU.
The customer is using XIO2001ZWS as XIO2001ZGU has been discontinued.
However, in the field, there was no problem with products to which XIO2001ZGU…