jim,
No, to run a stand-alone GUI you need to launch the .exe under the appropriate webapp/ folder. Ex:
C:\ti\guicomposer\webapps\InstaSPIN_F2806xM_UNIVERSAL\InstaSPIN_UNIVERSAL.exe
and in the case of the UNIVERSAL versions of the GUI you first…
Please read the attached and place here, it was not included in the last revision of MotorWare
C:\ti\motorware\motorware_1_01_00_11\docs\guis\universal\
Use the spreadsheet from here to set-up your user.h
http://e2e.ti.com/support/microcontrollers…
You can run the UNIVERSAL GUI standalone or inside CCS to instrument any MotorWare InstaSPIN-FOC project (we will have an update for InstaSPIN-MOTION projects in May/June). I think all the variables you would need are brought out for every lab....
You…
this is the transceiver which i used
8816.SPI to CAN FD SBC + LIN.pdf
i checked the schematic of the transceiver pullup resistor (1kΩ) and a series diode to VSUP connected to LIN bus.
in the linSend() function i can checked the signal on oscilloscope…
Hi,
Attached are the Boosterpack Pinout and MSP430F5529LP User guide. Please see Figures 40 & 41 in User Guide for Launchpad Pinouts. The unused lines (GPIOs) on the P2 & P3 of the BOOSTXL-CC1120-90 can be used for your Keypad.
If you change the Pins…
Part Number: TM4C123GH6PM Tool/software: Code Composer Studio Hello,
I am having issues when connecting the Touch LCD to the microcontroller. It remains turned off, although the code should be perfectly working.
I tried to fix the issue by setting…
Part Number: TM4C123GH6PM Tool/software: TI C/C++ Compiler Greetings to all!
I am relatively new to coding in CCS and also Kentec Display with Tiva Board. Currently I am trying to code a push button widget on to Kentec Display however at the same time…
Part Number: EK-TM4C1294XL Hi ,
I am new to Tiva TM4C1294Xl board . For my application , I need to integrate TM4C1294Xl board with 7 inch LCD display . Kindly suggest the Lcd and share some source code or project file for better understanding . I have…
