Part Number: CC2640 Other Parts Discussed in Thread: CC2592 , CC2650
Hi Team,
customer has some question, please kindly support it.
thanks!!!
Hello, during the process of using CC2640F128RHB, we found that the signal transmission distance of…
Part Number: AM5726 Other Parts Discussed in Thread: BEAGLEBOARD-X15 , AM5728 , AM3356
Hello,
I had already opened a thread on this topic. The old thread will now be closed.
https://e2e.ti.com/support/processors/f/791/t/848623
I thought it would…
sprabk5a.pdf Hi Naoki-san
It appears that there is a documentation/lit number error and the previous SPRABK5A1 KS1 throughput application note got overwritten by the KS2 throughput application note.
the KS1 and KS2 performance is different and they…
Jerry
I have attached a pdf below. Go to the section, " How to change Tetris and Core PLL speed " and check.
4401.MCSDK UG Chapter Exploring - Texas Instruments Wiki.pdf
Regards
Shankari G
Hi Justin,
"The PCM3168 board has a +/-15 V supply for the opamps, so the output can be centered around AGND, without clipping" this is simply not true. See this part of circuit:
Where you see +/-15 V supply? pcm3168a_motherboard.pdf
Chris,
It looks like battery voltage may be the problem here. You need to make sure to connect a battery or power supply of at least 3V to the Pack+/Pack- terminal, otherwise data flash won't be able to update. Here is a link to the EVM User's Guide…
Hi Michael,
Thank you for your attention.
I used the latest version SP v4.5 - P2.146 from www.ti.com/.../WL18XX-BT-SP.
On our OS, when I didn't push the TIInit_11.8.32.bts in /system/lib/firmware/ti-connectivity/TIInit_11.8.32.bts, I have this error…
Hi Diego,
My customer original design was follow Airprime's ref desihn ( 3G moduel:MC8090 + TLV320AIC1106PW) and without any problem.
Now Airprime will phase out MC8090 and ask them to change to 3 G module:WP8548 + TLV320AIC1106PW but they meet the…
