Other Parts Discussed in Thread: INSTASPIN-BLDC , CONTROLSUITE , DRV8301 , DRV8302 Hi TI,
I have a question regarding the startup procedure of a sensorless BLDC-motor on the DRV8301-HC-EVM kit. It seems that it takes a while for the motor to start spinning…
Hi,
I recently procured DRV830x-HC-C2-KIT_v103 kit and tried InstaSPIN BLDC.successfully. I wanted to explore sensorless PMSM and followed the configuration HW setting as mentioned in the page 16 of the datasheet Sensorless FOC of PMSM.pdf.
I could…
Matthew,
The error says that it has detected an F28035 device on the controlCARD. Sounds like you are using the TMDSCNCD28035ISO that came with the DRV8301-HC-C2-KIT. InstaSPIN-FOC GUI only works with the TMDSCNCD28069MISO, which you said you had. InstaSPIN…
ChrisClearman said:
you can use the standard example in controlSUITE, or you can copy over the one we use for the InstaSPIN-BLDC GUI
C:\ti\controlSUITE\development_kits\DRV8312-C2-KIT_v128\GUI_project_InstaSPIN_BLDC\F28035_FLASH_BLDC_Int_GUI_DRV83xx…
Other Parts Discussed in Thread: DRV8301 Customer asks:
We are using the DRV8301-HC-EVM with Hercules RM46CNCD for initial motor control development work. Recently, my software guy Mike, ran into an issue with failing to spinning the BLDC using Hall…
Hi there
I recently purchased the DRV8301-HC-C2-KIT. I finally got ccs5.2.1 to load and now i am REALLY struggling to get the sample projects to run. I can't even set the parameters of the code past level 2. I am not sure if I am making fundemental…
Other Parts Discussed in Thread: DRV8301 Dear Sir
I'm trying to do the lab5e. My hardware is f28069M + DRV8301-HC-EVM.
When I trying lab12a, the "gMotorVars.Flag_enableSys" can't enable.
I found the error is "USER_ErrorCode_voltageFilterPole_Hz_Low…
Other Parts Discussed in Thread: INSTASPIN-BLDC , MOTORWARE , RM46L852 Hi,
I am attempting to run my motor with the DRV8301-RM46 motor board. I have gone through the hardware guide for the controlcard and the driver board as well as the instaspin…
Hello everyone,
I am using the DRV8301-HC-C2 kit in an electrical vehicle project. Since i replaced the old (plug and play from the company that makes the motor) controller to the DRV kit, strange things are happening. E.G. When i use the DRV to control…
Here are some research ( link1 , link2 , link3 ) articles on “VARIABLE DC LINK”, a means having a DC-DC converter in-front of the source for the motor or more particularly the source to whichever H-Bridge is chosen. This is a sensor based design that…
