Other Parts Discussed in Thread: AFE4403 Hi,
I am trying to download the zip file from www.ti.com/.../afe4403evm Documents for the AFE4403 kit, but he problem is that the downloaded file format is not sown as the zip file format. Because of this i am…
Other Parts Discussed in Thread: AFE4403 , ADS1292R , TIDM-BIOSIGNMONITOR , ADS1292 Dear TI E2E™,
We have to make a new design for Heart rate monitor with Pedometer, Memory for Datalogging, Batterie management, and Bluetooth connexion...
This design…
Hello Jun,
The example driver code for AFE4403 is available at the AFE4403 Tools page: www.ti.com/tool/afe4403evm
Here is the link for your quick access: www.ti.com/.../slac677
The driver code for ADS1292R is also available at the ADS1292R tools…
Hello Nordine,
Yes, there are developing kits that have a much simpler approach. Please check the following EVMs.
AFE4400 – www.ti.com/product/afe4400 or www.ti.com/tool/afe4400spo2evm
AFE4490 – www.ti.com/product/afe4490 or www.ti.com/tool…
Hello Dhaval,
Could you be more specific about the family of AFE44xx device? Is it AFE4400 or AFE4490 or AFE4403?
I would like to know more about your test setup.
Are you running your test on TI evaluation module or on your custom board?
If it…
Hi,
I recently bought the AFE 4403 EVM module(watch) from SVtronics. I installed the following GUI from TI website, as instructed in the user guide.( AFE4403EVM GUI v2.0.7 (Rev. A) ). After the GUI installation, I installed the USB driver as well by…
Other Parts Discussed in Thread: AFE4403 Hi,. All
I attached a file about AFE4403 EVM Bd ciucuit from TI.
Is it must set D1,D2 and L1 for INN,INP? AFE4403_EVM SCH.pdf
And D7,D3,D4 for Tx3,TXN,TXP too?
Please, Inform me ASAP.
Best Regards…
Other Parts Discussed in Thread: CCSTUDIO CCS 6 cannot connect to target AFE4403 EVM , USB0,1,2 all fail, UART either. MSP-FET430UIF Jtag Emulator talk normally the target AFE4403 EVM.
I do not know what is wrong in CCS6 which is free license. Do I…
Hi Gautam,
I was using the devise with out the firmware update and it was getting detected in the system(PC) and i was able to run the GUI code with this.
But in the pdf which i downloaded from TI website was saying that after the GUI software installation…
Hi Amy,
Yes, I was able to do so. I see it as AFE44xx EVM (COM4).
I have given up using the code composer, and am currently trying to communicate with the board using pySerial library. I obtained a document describing the message communication protocol…
