Part Number: AM3356 Tool/software: We are facing a problem which the cpu usage of kworker becomes high (about 70%) and some software stop working. At this time, musb_urb_dequeque() in usdb_dhrc and rx_submit() in usbnet have high cpu usage in perf tool…
Part Number: AM3356 Hi TI support
I am investigating if it is possible to use the PRU in switch mode with the Linux SDK for AM335X. In the Processor SDK Linux for AM335X 09_01_00_001 documentation I found the following statement:
( https://software…
Part Number: AM3356 Other Parts Discussed in Thread: PROFIBUS , Hi ,
we are planning to use Profibus with aM3356 processor . For this whether we have to use the PRU -UART0 or any normal UART can be used ?
Also if we are using the PRU - UART0 , whether…
Hello Eby,
The recommendation is to connect separate VBUS for design flexibility.
Using a common VBUS creates dependency on the operation of the 2 ports.
Regards,
Sreenivasa
Part Number: AM3356 Other Parts Discussed in Thread: TMDSICE3359 PN_cpmIsrHandler miss occasionally in IRT device when IRT and RT mixed.So the PLC did not receive the signal of life value it expected.
Part Number: AM3356 Other Parts Discussed in Thread: PROFIBUS Hi
We are having an existing board with AM3356 which has the following interfaces
16 bit DDR3 RAM
8 bit NAND Flash
RGMII1 and RGMII 2 used for Gigabit ethernet
UART0,UART1,UART3…
Part Number: AM3356 I am using processor AM3356 and linux kernel version is 5.4188.
# i2cdetect -F 1 Functionalities implemented by /dev/i2c-1: I2C yes SMBus Quick Command no SMBus Send Byte yes SMBus Receive Byte yes SMBus Write Byte yes SMBus Read…
Part Number: AM3356 Hi, Expert.
In normal mode, OTG on usb0 works well. But after sleeping and waking-up, it does not work.
Please help me!
There are no messages in dmesg. Host mode on usb1 also works well, even after waking-up.
Contidions USB…
Part Number: AM3356 Other Parts Discussed in Thread: AM3358 HI ,
Currently we are using AM3356 ZCZ 600 MHz processor working in OPP100 in our design . Can we upgrade this to a 800MHz and 1GHz processor without any Hardware and Software changes
Regards…