Search tips
Showing 813 results View by: Thread Post Sort by
    Answered

  • RE: AM4372: AM4372 no booting

    Resolved
    Sr. Thank you very much for your answer, it is of great help for our company; In this moment we have a production retained because of this problem. We have based our design in am437x_starterkit_evm_3k0009.dsn, and we are using AM4372 We have a difference…
    • Answered

  • AM4372: Can I use the UART_PRUSS0 as a standard UART?

    Resolved
    Part Number: AM4372 Hi TI! I am out of 6 standard UARTs and I need one more UART. Is there any problem (at linux level, building the kernel, ...) if I use the UART_PRUSS0 as one of the 6 standard UARTs? Can I use the UART_PRUSS0 as a standard UART…
    • Resolved

  • AM4372: AM4372 - to use with SGX530.

    Part Number: AM4372 I want to use SGX530 with TI processor AM4372. I'm new to such graohics accelarator. which IDE to be used for GUI development? I'm using eclpse IDE with yocto SDK for my normal application development. please let me know if any…
    • Answered

  • AM4372: Configuration pins of the boot source common to UART

    Resolved
    Part Number: AM4372 Hi TI! I need to use pins A19 and B19 as UART5_TX and UART5_RX respectively as the linux command output. These pins are also used to configure the boot source. So they have two external resistors (pull down) connected to configure…
    • Resolved

  • RE: AM4372: High Speed Connection between AM4372 and an FPGA

    Hello, MAC-to-MAC connections are not supported on this family of devices. Have you considered USB? You don't mention the BW needed for your application, but High Speed USB @ 480Mbs would be easy to implement and I would expect that there are USB…
    • Answered

  • AM4372: CTRL_CQDETECT_STS Register

    Resolved
    Part Number: AM4372 Hi Support Team, Please advise me about the IO voltage setting of CTRL_CQDETECT_STS Register. My customer's board has the following configuration. MMCSD0: SD card *IO voltage is 3.3V MMCSD1: eMMC *VCCQ is 1.8V MMCSD2: Not used…
    • Resolved
    • Answered

  • AM4372: NAND Boot Failure with 2Gbit

    Resolved
    Part Number: AM4372 Other Parts Discussed in Thread: AM4378 Hi TI Champs There's request from Customer who uses 2Gbit NAND for boot device. They have used 1Gb sucessfully. But their client requested to increase the memory capacity to 2Gb. Therefore…
    • Resolved

  • AM4372: sdhci-omap timout during reboot

    Part Number: AM4372 Other Parts Discussed in Thread: AM4376 Hi All We have following issue with the sdhci-omap driver in the AM4372 processor on a custom board System MPU : AM4372BZDN80 Linux kernel : 5.10.120, SRCREV = "ab2d96e4f21159a7df2e87a6fb2a29bd9535506b…

  • AM4372: Issue in sdhc driver and File system

    Part Number: AM4372 Other Parts Discussed in Thread: TPS65218 , , TLC59116 , TCA9539 Hi, I am moving from mmc driver to sdhc driver and facing issues in getting the ext4 and consequently VFS up and running. I can see the mmcblk1 device getting initiated…

  • AM4372: SPL Uboot DP83867 initialization on an AM4372 Board

    Part Number: AM4372 Other Parts Discussed in Thread: DP83867IR Hello, our customboard is based on a am437x-EVM board, but uses the DP83867ir PHY to support 1Gbit-Communication. The ROM-Bootloader is able to load the SPL-Bootloader over Ethernet. After…

Didn't find what you are looking for? Post a new question.