Search tips
Showing 835 results View by: Thread Post Sort by
    Answered

  • AM4372: The AM4372 has PCM?

    Resolved
    Part Number: AM4372 Hi TI, The AM4372 has PCM? Can I send digital audio to a PCM format codec with the AM4372? Thanks very much. Best regads.
    • Resolved

  • AM4372: AM4372 Warm Reset Pin Behavior and Boot Issue

    Part Number: AM4372 Hello TI Team, We are using AM4372 CPU on our BRM100 mainboard with the following structure: AM4372 (CPU, TI) – PMIC (TPS65216D0RSL) – FPGA (10CL016, Altera) . We have observed an intermittent boot failure in the field during…

  • AM4372: How to Temporarily Disable WARMRSTn Function During AM4372 Boot to Avoid Unintended Resets

    Part Number: AM4372 Dear TI Support Team, We are currently developing a system using the AM4372 processor. During the power-up sequence, we observed that the FPGA on our board generates transient noise on the WARMRSTn line, which causes the AM4372 to…

  • AM4372: SLEWCTRL

    TI Thinks Resolved
    Part Number: AM4372 Hi team, Each pin of AM4372 has a SLEWCTRL register, but what is the specific difference in drive strength between 0=fast and 1=slow? For example, is the maximum output current different for each setting? Also, are there any other…
    • Answered

  • AM4372: Inquiry about power

    Resolved
    Part Number: AM4372 Hi team, I have questions regarding the AM4372 power pins and power-down sequence. In the datasheet section [5.12.1.1 Power Supply Slew Rate Requirement], what specifically are the "internal ESD protection devices" mentioned…
    • Resolved

  • AM4372: HSR PRU update

    Part Number: AM4372 Dear TI team We are using a TI AM437x processor with HSR PRU firmware from SDK 06.03.00.106. It turned out that our device has interoperability issues with another HSR device from Siemens. In your git history of PRU firmwares …
    • Answered

  • AM4372: Support for WINBOND SPI NOR (W25Q512JVFIQ)

    Resolved
    Part Number: AM4372 Dear team, As of today, we have our custom boards using TI AM4372 SoC with QSPI NOR flash part used is Macronix chip number MX66L51235F. Going forward we also want to use WINBOND part (W25Q512JVFIQ) with JEDEC #id (0xef, 0x40,…
    • Resolved

  • AM4372: Timing of GPMC synchronization mode for AM4372

    TI Thinks Resolved
    Part Number: AM4372 Tool/software: HI。TEAMS If the synchronization mode of AM4372 selects 16 bits for data, does it take 16 clock cycles to read 16 bits? Is AM4372 16 bit parallel port parallel to serial?

  • AM4372: AM4372 bootup time is much longer than AM335x for the core image minimal of YOCTO

    Part Number: AM4372 Tool/software: Our test shows that the core image minimal built by YOCTO (Beaglebone black) on the AM335x platform boots up in ~15 seconds while the equivalent system on the AM437x platform (AM437x industrial dev kit) takes ~60 seconds…

  • AM4372: Questions regarding the use of cross-compiler in SDK 09.03.05.02

    TI Thinks Resolved
    Part Number: AM4372 Other Parts Discussed in Thread: AM4378 Processor: AM4378 SDK: ti-processor-sdk-linux-am437x-evm-09.03.05.02 The release notes document for SDK 09.03.05.02 ( https://software-dl.ti.com/processor-sdk-linux/esd/AM437X/09_03_05_02/exports…

Didn't find what you are looking for? Post a new question.