Other Parts Discussed in Thread: BQ25600 , BQ25601 , BQ25600C , BQ25600D , BQ25606 , BQ25601D
BQ2560x FAQ Home Page
This is the home page for common questions in relation to the BQ25600, BQ25600D, BQ25600C, BQ25601, BQ25601D, and BQ25606.
FAQs…
Part Number: BQ25611D Other Parts Discussed in Thread: BQ25601D , BQSTUDIO hi,
i am currently designing a charger circuit for my audio product.
i would like to know any hardware connection or software setting that need to consider in order to allow…
Hi,
The BQ25308 has no battery detection feature. It will regulate the output even if a battery is not connected. Please refer to the FAQ below and the principle is similar.
[FAQ] BQ25601: [FAQ] Why does the LED connected to STAT pin flashes and the…
Hi Honnesh,
https://www.ti.com/tool/BQ256XXSW-LINUX is for BQ2560x and BQ2561x which are totally different products from the BQ25638.
https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1023964/faq-bq25601…
Hi Nan,
Please refer to the FAQ below. The principle is the same for BQ25306. If STAT blinking is not preferred, please disable the charger by /EN pin.
https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1022795…
Part Number: BQ25629 Tool/software: Dear Sirs and Madams,
As per the FAQ below, I understand that charging must be stopped when the battery is not connected.
[FAQ] BQ25601: [FAQ] Why does the LED connected to STAT pin flashes and the SYS voltage…
Part Number: BQ25611D Other Parts Discussed in Thread: BQ25601D ,
I have a board, see attached screenshot of the power section, that originally had a BQ25601D but had to replace it with a BQ25611D due to the default over-voltage lockout setting of the…
Part Number: BQ27546-G1 Other Parts Discussed in Thread: TPS61230A , BQ25601D , BQSTUDIO , GPCCHEM Hi team,
Here's an issue from the customer may need your help:
A handheld device, battery: ROOFER INR18650-2200A, single cell 2200mAh, six string with…
Part Number: BQ25601 Customer is interested in knowing how long it takes to exit shipping mode when QON pin is pulled low. We know the t_shipmode time is 0.9s to 1.3s per other E2E posts and bq25601D data sheet. Is t_shipmode just the time for QON detection…
