Hi Pavel,
I have created the filesystem with following steps,
1: mkfs.ubifs -r <path to fs> -m 2048 -e 126976 -c 993 -o ubifs.img 2: ubinize.cfg file [ubifs] mode=ubi image=ubifs.img vol_id=0 vol_size=121MiB vol_type=dynamic vol_name=rootfs 3: ubinize…
Hello,
GC Studio is published with a set of manuals for scripting with the C library and GC101 hardware. The scripting tool is embedded with GC Studio. The manual should be available from the GC Studio Help menu. The pdf is installed with the path…
Part Number: TAS2572
Tool/software:
Hi Ti
Our product uses 1W rating power speaker but we found the FW setting of AMP_LVL register was 0x06 and caculated to 18dBV and 7.8W.
1. AMP_LVL register setting is must to do? Or can leave it at default…
Hi Rex,
as stated we are using ti-rt-linux-4.9.77 from git://git.ti.com/ti-linux-kernel/ti-linux-kernel.git
As I see it, this one does include the patches for the AM572x platform: 1|tq@tqma57xx-build:/opt/tqma57xx-bsp/linux-tqmaxx> grep -r AM572 …
The Fusion Digital Power Designer uses the USB-to-GPIO to communicate with the sequencer.
Refer to the following document for information about configuration loading.
0652.Configuration Programming of UCD Devices.pdf
Other Parts Discussed in Thread: TPS65910 , TPS65217 , DA8XX Hello,
I follow the instruction in :
http://processors.wiki.ti.com/index.php/TI-Android-JB-4.2.2-DevKit-4.1.1_DeveloperGuide#TI_Android_JB-4.2.2-DevKit-4.1.1_Developer_Guide
and build…
My appology for relying late due to that I didn't have the board on hand lately.
I attached the kernel log and please check it.
[2021-05-26 19:18:26.898] dmesg [2021-05-26 19:18:27.548] [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd080…
Part Number: J721S2XSOMXEVM
Hi there,
Recently we encountered a strange boot problem. We are using the XJ721S2GALZ chip in a customer board which is the same as the j721s2-som-evm. In this board we use a single MT53E1G32D2FW-046-AUT-A ddr chip and…
