Part Number: AM5708 Other Parts Discussed in Thread: DRA718 , DRA72 , DRA722 , PCF8575 , TLV320AIC3106 , LP8733 , TPD12S015 , CSD Tool/software: Linux Hi: I have a custom AM5708 based board and SDK Linux 05.00.00.15. Attached are the device tree and defconfig…
Hi Maynard,
Sure. I have attached the 3 PDFs here and we will fix these links to automatically redirect to the new pages.\
/cfs-file/__key/communityserver-discussions-components-files/791/Processor-SDK-Linux-Automotive-Data-Sheet-_2D00_-Texas-Instruments…
Hi:
I am a Enrique´s colleague.
Our device is an endpoint device that makes CPSW work in dual mac mode and ony have one ethernet interface port.
Attached is the "ifconfig -a" command output.
Attached is also the device´s dts and we are using the…
Hi Wei,
Your environment variables seem different from the default environment. Do you have changes in u-boot?
Please replace the MLO and u-boot.img file in the boot-partition with that attached (rename the files by removing the .txt suffix).
For…
Hi Stefan,
Can you update your MLO, u-boot.img and uenv.txt in the boot partition of the SD-card and see if the kernel boots?
To update the config can you run the below steps?
Add the below lines to ti_config_fragments/auto.cfg (present in the kernel…
Part Number: AM5718 Other Parts Discussed in Thread: TLV320AIC3106 , PCM5102A , BEAGLEBOARD-X15
Hi
we have to port codec driver in AM571-idk to explore the codec functionality before our custom board arrived.Based on the reference design (AM572x-GP…
Part Number: AM5708 Hello all,
I'm working on a custom board which is based on AM5708 booting on a NAND.
Previously I was working with processor-sdk 06_03_00_106 which is providing linux-ti-stagging 4.19 kernel, system working fine with device…
Hi Anand,
The following is the details about the problem.
1.the exact navigation application have no problem with using on kernel 3.14(glsdk 7.04),but it is the first time to use the navugation application on QT;
2.there was no code change done…
Part Number: DRA72 Tool/software: Linux the carlife already connected success，but still occur EAP write timeout when use the IF 3，then I use USB logic analyzer to capture data，result indicate the last data do not sent out.
attachment is a related log…
