Other Parts Discussed in Thread: DS100MB203 , DS100BR111 , DS110DF410 , DS110DF111 , DS125DF410 , DS125DF111 , DS125MB203 , DS280MB810 , DS100BR210 , DS64BR111 , DS100BR410 Hi Sirs,
As title
We are survey re-driver for 10G Serdes (SFP+) applicaiton…
Other Parts Discussed in Thread: DS100MB203 , DS250DF230 , DS125DF1610 , DS250DF410 , DS280DF810 Hello,
My customer is looking for an on-switch device for PTN(Packet Transport Network) application.
1. Unit
- Line side : SFI(SFP+) 4 Port
- System…
Hi Ananthesh,
With the twin-ax cable the inputs will see a differential signal.
The line rate is a little low for the DS280MB810 which is optimized for 25Gbps.
You could also look at the DS100MB203 mux buffer solution.
Regards,
Lee
Hi,
We have made the following changes in DS100MB203 and TLK10034 registers:
DS100MB203:
Instead of setting the DEM as '0' dB, we have changed to '-1.5dB', that is 0x26 register->0x01.
TLK10034:
0x1E.0x0004-->0xE400 and 0x1E.0x0004-->0xD400 for port…
Other Parts Discussed in Thread: DS100MB203 Hello,
I have a question and refer to the below.
Please send me your comment.
Q1 : I ’ m trying to use DS100MB203 part to duplicate 10GBASE-KR SerDes signal from linecard unit to switch unit(A/B).
If…
Hello, No TI does not have a reference design / EVK for the DS100MB201. The DS100MB203 is a similar device and TI does have a reference design and EVK for this device. You can refer to the DS100MB203EVK User's Guide
Hi,
I would use either the DS100MB203 or the DS125MB203.
In an SFP transceiver application I would place the MB203 approximately 2 inches from the connector.
Regards,
Lee
Hi Andy,
Since the customer is using 10G-KR, there is a likelihood that link-training will need to be supported, and this is not supported by our datacenter retimers. If a simple mux/demux solution is needed, I would suggest using a DS100MB203.
…
Hi Norbert,
The HD3SS3212 supports up to 10Gbps. As well, this device is intended to USB applications. Please take a look into the DS100MB203 that is a Mux/Buffer 2:1/1:2 for 10GE, 10GBASE-KR, XAUI, etc. It seems this device supports your application…
