• DS26F31MQML-SP: NAJ package

  

  David Park

  TI Thinks Resolved

  Part Number: DS26F31MQML-SP Other Parts Discussed in Thread: DS26F32MQML-SP , Hi, Could you let me know if NAJ package of DS26F32MQML-SP and DS26F31MQML-SP? I couldn't find 5962-7802005M2A, DS26F32ME/883 in TI.com. Thanks.

  • 19 days ago
  • Interface
  • Interface forum
Answered

• DS26F31MQML-SP: SEL information needed

  

  Zackery Painter

  Resolved

  Part Number: DS26F31MQML-SP Hello, I need SEL information for the DS26F31MQML-SP. It appears that only SEE and TID are provided on the project page. Thank you.

  • Resolved

  • over 2 years ago
  • Interface
  • Interface forum

• DS26F31MQML: timing jitter propagation delay temperature dependence

  

  Leif Kirschenbaum

  TI Thinks Resolved

  Part Number: DS26F31MQML Other Parts Discussed in Thread: SN55182-SP , Can you post data regarding the jitter on timing between input and output for this device, as well as numbers or a plot of the temperature dependence of tPLH and tPHL.

  • over 2 years ago
  • Interface
  • Interface forum
Answered

• DS26F31MQML: Theta Jc Clarification

  

  Tyler Couvrette

  Resolved

  Part Number: DS26F31MQML Hello, I need the Theta Jc for this device, but I'm skeptical about the one listed on the datasheet. I'm guessing it's supposed to be 13 C/W instead of C/mW as shown. My thought is with this Theta Jc (13 C/mW) and max current…

  • Resolved

  • over 3 years ago
  • Interface
  • Interface forum

• DS26F31MQML-SP: Need thermal resistance for DS26F31MQML-SP

  

  Supriya G R

  TI Thinks Resolved

  Part Number: DS26F31MQML-SP Dear Team, Kindly provide Theta-JB or Theta-JC for DS26F31MQML-SP (Ceramic Flat Pack)

  • over 4 years ago
  • Interface
  • Interface forum

• DS26F31MQML-SP: what happens if one drive is shorted

  

  Adam Daluga

  TI Thinks Resolved

  Part Number: DS26F31MQML-SP Hello, I am looking at using DS26F31MQML-SP for RS422 communications. We need to be redundant and the current driver we are using has a potential issue where if one drive dies it could kill the whole chip. DS26F31MQML-SP…

  • over 2 years ago
  • Interface
  • Interface forum
Answered

• DS26F31MQML-SP: RS-422 Cold Spare I/O

  

  Sam Stratton

  Resolved

  Part Number: DS26F31MQML-SP Other Parts Discussed in Thread: DS26F32MQML-SP , I would like to know if the DS26F31MQML-SP and DS26F32MQML-SP have 'Cold Spare' I/O? Cold Spare simply means the I/O's are high impedance when Vcc is below a certain value or…

  • Resolved

  • over 3 years ago
  • Interface
  • Interface forum

• DS26F31MQML: PKG CFN 16

  

  jessie L

  TI Thinks Resolved

  Part Number: DS26F31MQML Hi there, I am urgently need to confirm about the package of DS26F31MQML CFP16 we bought on TI store, which has been found different with MECHANICAL DATA NAD0016A drawing. Our QC detected that the leads of both side outmost…

  • over 4 years ago
  • Interface
  • Interface forum

• DS26F31MQML-SP: High Current Consumption whilst Enable' pin is held High

  

  Zafer Caliskan

  TI Thinks Resolved

  Part Number: DS26F31MQML-SP Hello, We have seen high current consumption(approximately 30 mA) while Enable'(active low) pin is held High and Enable(active high) pin is held as high. But when Enable' is held low (While Enable pin is still held as High…

  • over 3 years ago
  • Interface
  • Interface forum

• DS26F31MQML-SP: RS-422 with Cold spare I/O

  

  Sam Stratton

  TI Thinks Resolved

  Part Number: DS26F31MQML-SP A few months ago I asked about the 'Cold Spare' capability of the above part number. Do all RS-422 drivers and receivers have the same feature as the Space ones? We want our RS-422 interfaces to be able to be connected to an…

  • over 3 years ago
  • Interface
  • Interface forum

Didn't find what you are looking for? Post a new question.