Part Number: LMH1208 Tool/software: Dear Team,
I am using the LMH1208 as a single cable driver, utilizing only the SDI_OUT1± output.
In this configuration, the SDI_OUT2± and OUT0± outputs are not used.
Could you please confirm whether it is acceptable…
Part Number: LMH1208 Other Parts Discussed in Thread: LMH1297 , LMH1226 , LMH1219 , LMH1218 , LMH1228 , LMH1297EVM , LMH1229 Tool/software: We are being asked to design a 3U 160 mm card with e 75-ohm BNC to 100-differential convertor. The signal speed…
Part Number: LMH1219 Other Parts Discussed in Thread: LMH1208 , Hello,
I have an application that need to use EQ for HD-SDI from 1 signal to 4 signals and I need an advice which option is better.
for what I can see there is 2 options which the LMH1219…
Part Number: LMH1208 I have seen many applications of the SDI interface and I understand the termination schemes of transmitting over a single coax and terminating the other output capacitively into 75 ohm. The same is then done at the receiver.
However…
Part Number: LMH1208
Hello,
Customer wants to use RS-170(NTSC/PAL) input and make 4 outputs as below diagram.
Is it possible to make this configuration?
If above configuration is available,
1. Can select LMH1208 output as 12G, 3G, HD or SD…
Greetings,
I am assuming this is 12G SDI signal? Do you have a scope shot of the LMH1208 75-ohm output?
Please note LMH1208 SLEW_CTRL should match data rate. Is this taken care of ?
I also noticed you are using closely coupled differential traces…
Part Number: LMH1297 Other Parts Discussed in Thread: LMH1219 , LMH1208 , , LMH1228 , LMH1218 Hello,
Our customer is looking for LMH1208 and LMH1219 single chip solution product. Then he has a question if LMH1297 can work as 12G UHD-SDI driver and 12G…
Part Number: LMH1208 Other Parts Discussed in Thread: LMH1228 , LMH1297 , LMH1219 Hi Team,
LMH1208 will be used for long distance transmission with cables, could you please tell the driving ability? How long the cable could be driven?
Thanks and Best…
Greetings,
In the earlier email, i sent board material that we are using for 12G SDI evaluation boards. Please send me email and we can send you pcb layout to help with the pcb layout. Here is email: nasser.mohammadi@ti.com
Regards,, Nasser
