Part Number: MSP430F6733 Other Parts Discussed in Thread: MSP-GANG I’m looking for a simple yet effective way to protect the chip from being read/reverse engineered/modified.
Part Number: MSP430F6733 Other Parts Discussed in Thread: MSP-GANG , Team,
I need to unlock the JTAG of MSP430F6733. so far, I can use MSP-GANG BSL interface to erase the memory of MSP430F6733. I want to know how to use MSP-GANG to unlock the JTAG?…
Part Number: MSP430F6733 Hi Team,
1MSP430F6733(80pin) does not wake up after several times of /RST switching.
keeping 3.3V on VDD, if I apply PWM that has 2s offtime and 1s on time on /RST port, after 20s~40s, device does not wake up and can't reset…
Part Number: MSP430F6733
Hi,
I have a question about SD24_B input range. Accoding to Absolute Maximam Ratings, SD24_B input pins (SD0N0, SD0P0,SD1N0, SD1P0, SD2N0, SD2P0 -0.3V min ~ Vcc + 0.3V max
And 5.15 SD24_B specs ( Page 52 ), Common-mode input…
Part Number: MSP430F6733 Hi team,
I need your help for the below case.
Application: e-metering.
After working some time in an aging room where we maintain temperature (still within operating range) and switch on/off voltage current, all the flash…
Part Number: MSP430F6733 Hello,
My customer put 1000nF=1uF on the VREF pin. Is it no problem for the SD24_B?
The DS recommends 100nF and accepts even 'no caps'. Then how about a larger cap like 1uF?
Under SD24REFS=1, the pin is fed 1.2V by a buffer…
Part Number: MSP430F6733
Hello, The DS p.14 says "(3) The pins VDSYS and DVSYS must be connected externally on board for proper device operation."
But a handy tester shows they are connected resistively. 1.5ohms on display.
Then can I ask the remaining…
Hi Yue,
Mass erase always comes back with an Unknown ACK.
We do have example code for JTAG OPEN in the MSPBSDL_Scripter download, in the Example folder.
Other Parts Discussed in Thread: MSP430F6733 Hello
I read something about a sinc3 filter, and there are some information.
But I can't understand its characteristics.
I understand a sinc3 filter is some kind of simple moving average. Is it wrong…
Hi
I am using SD24 with setting register below.
SD24BCCTLx[8bit] = 0b continuous mode
SD24BOSRx[0-9bit] = FFh (OSR=255)
SD24INTDLYx[6-7bit] = 11b First sample causes interrupt
But I couldn't get any sample. (When I check the sample value…
