Hey Tom,
At the beginning of this week I browsed these TI forums a lot and saw your post as well. To answer the questions in this post I must say that the code is quite accessible and modifiable, though not very well documented. The API that is used…
Part Number: AM5728
Tool/software: Linux
Hello. I'm use ti-processor-sdk-linux-am57xx-evm-03.03.00.04 on AM5728. I have parallel RGB24 1024x768 video source with discrete syncs. I got my driver and can capture images with ti-vip driver. But I want…
Part Number: SK-AM62P-LP Tool/software: Hi,
I am using the SK-AM62P-LP board with PSDK version 09.02.01.10 and MCU+SDK version 09.02.01.08. I have a TI dual-channel display with a resolution of 1920x1200.
Weston service works fine in both SD card…
Part Number: TDA4VM Hello everybody ,
I'm trying to bring up the MIPI CSI-2 RX interface in the J7/TDA4VM board.
My HW and SW setups are exactly like described here: http://software-dl.ti.com/jacinto7/esd/processor-sdk-rtos-jacinto7/latest/exports…
Robert Dobrose said: documents on migrating from BIOS4X to BIOS5X
I was able to dig up a PDF copy of an old wiki link that covered this topic:
Migrating from BIOS 4.9 to BIOS 5.x.pdf
Probably the most useful part of this old doc is the last part…
Other Parts Discussed in Thread: AM3352 , AM3359 Hello,
First off I am using the 3.2 kernel from SDK 6.00.00.00 as well as the toolchain from this version and this is a custom board.
Everything is working pretty smoothly so far and i can see the Penguin…
Hello dear e2e community,
I set up a Siemens S7 PLC and Touchpanel, to communicate with a ICEv2 Sitara Board. After some problems at first, it then really worked smoothly, and I could send some bytes between my PLC and the sitara, boot from SD-card…
Other Parts Discussed in Thread: DM3730 , OMAP3530 Dear,
I want to encode video from YUYV stream to h264 file using DSP C64+ of DM3730 on an angstrom Linux 2.6.32
The camera is mounted in /dev/video0 and its stream is well recorded with ffmpeg for…
Other Parts Discussed in Thread: 66AK2H12 Hi,
I am getting below error: root@keystone-evm:~/Demo_Scripts/sv04# mpmcl load dsp0 sv04.out [ 1336.187837] Alignment trap: not handling instruction e1923f9f at [<c04f2e6c>] [ 1336.194956] Unhandled fault:…
Hi Asha, I tried compiling the model using TIDL tools, but the calibration stopped after the 4th iteration with an error message. For your information, I set the debug level to 2. I have attached the TIDL tools compilation logs. Please check them. tidl…
