Part Number: SN74LVC16T245-EP Tool/software: Hi Sir,
I am using "CLVC16T245MDGGREP" from the "SN74LVC16T245-EP" family
I have activated enable and direction pins but am not giving any inputs to input pins (For Eg-1A1) it is in a high impedance state…
Part Number: SN74LVC16T245 Hello, this is my first time designing a bidirectional application.
SN74LVC16T245 datasheet section 10.1.1 reads:
In a bidirectional application, these enable times provide the maximum delay from the time the DIR bit is…
Part Number: SN74LVC16T245 In the data sheet, absolute maximum rating says the VI Input Voltage maximum rating for I/O port is -0.5V to 6.5V. In the recommended operating conditions, it says VI/O input/output voltage active state 0 to VCCO. I wanted to…
Part Number: SN74LVC16T245 regarding unused pins termination-:
1) Unused output can keep open.No need to have pull-up or pull down.Is it right?
2)Unused inputs can we tied directly to GND or do we have to use some resistor lets say 20kohm to pull…
Part Number: SN74LVC16T245-EP Hi,
We wanted to know the maximum input voltage of SN74LVC16T245-EP. We are having confusion regarding the spec VI/O Input/output voltage given in the datasheet.
The use case is to supply 3.3V input to the transceiver…
Part Number: SN74LVC16T245 Other Parts Discussed in Thread: SN74LVC16245A Hi Team，
DL package pin configuration is not listed in the datasheet of SN74LVC16T245.
I think it's the same to DGG and DGV Packages, they are all 48pins package.
If so, please…
Part Number: SN74LVC16T245 Other Parts Discussed in Thread: TXU0304 , TXU0104 , TXU0204 Hello,
I want to achieve bus t ranslation between 3.3V to 5.5V and 3.3V to 1.8V. So I hope for for a quick review of my usage of the SN74LVC16T245 in the schematic…
Part Number: SN74LVC16T245 Hi, Ti experts;
we are using SN74LVC16T245 ;
The data sheet describes the Ci of shared port pin values 4pF typically.
My customer wants to know how to test the Ci, and can i use the LCR to test?
if we can use LCR to…
