Part Number: SN74LVC1T45 Other Parts Discussed in Thread: TXB0108 , TXS0102 , SN74LVC2G34 , SN74LVC1G34 , SN74LVC3G34 , SN74AHC1G125 I have a question about the interface of 3 devices connected to UART. Device A's I/O control is done by FPGA, and it processes…
Part Number: SN74LVC1T45 Hi,
In setup where DIR pin is tied to ground and data is going from B to A, input B can sometime left floating (device is powered up, both VCCA and VCCB side). Of course, during floating input B, data at output A is not used…
Part Number: SN74LVC1T45-Q1 Is it possible to supply VCCB with 1.8V while having a 5V input at Input B?
Looking at the datasheet and reading through the values there seems to be no positive clamping diode as the input clamping current can only…
Part Number: SN74LVC1T45
Hi Team:
A question regarding SN74LVC1T45QDCKRQ1 from me, What kind of error will found if VCCA is before VCCB ?
Thank you
B.R.
Lucas
Part Number: SN74LVC1T45-Q1 Hello team,
I received a question from the customer,
Is there any problem if there is a time difference (a few seconds to a dozen seconds) between VCC2 applied to pin 6 and pin 4?
Regards,
Masa
Part Number: SN74LVC1T45-Q1 Hi Team,
Customer has a design where they power on VCCA 1.8V rail before VCCB 3.3V/5V.
Datasheet mentions:
Is there any risk involved with power sequencing VCCA before VCCB?
Kind regards,
Lucas
Part Number: SN74LVC1T45 Hello Team,
I faced problems with the SN74LVC1T45 level translator. At higher frequencies, the output waveform was not as expected. Hence I am thinking of LSF010X . It can be used for bidirectional voltage-level translation…
Part Number: SN74LVC1T45 Other Parts Discussed in Thread: SN74LV1T04 , SN74LV1T34 , SN74LVC1G17 , SN74LVC1G14 I need a similar specifications part but with an inverter function. Can you support in this requirement?
(I could find SN74LV1T04, but its…
