Answered

• SN74LVC1T45: What is the difference between SN74LVC1T45YZPR and SN74LVC1T45YZPRB?

  

  Greg Freeman

  Resolved

  Part Number: SN74LVC1T45 Hello, With the ongoing supply chain issues we are not able to source the SN74LVC1T45YZPR in time for our build, but we have found stock of the obsolete SN74LVC1T45YZPRB device. However, I cannot seem to find it listed in the…

  • Resolved

  • over 4 years ago
  • Logic
  • Logic forum

• SN74LVC1T45-Q1: I am having trouble with a device attached to the A port

  

  TI-CSC

  Part Number: SN74LVC1T45-Q1 Hello E2E Experts, Good day. I am using a voltage translator SN74LXC1T45QDCKRQ1, and I am having trouble with a device attached to the A port of the SN74LXC1T45QDCKRQ1. The sensor attached to this port is failing and…

  • over 3 years ago
  • Logic
  • Logic forum

• SN74LVC1T45-EP: SN74LVC1T45-EP

  

  Ramgopal Divakar

  TI Thinks Resolved

  Part Number: SN74LVC1T45-EP Other Parts Discussed in Thread: SN74LVC1G17-EP I need to drive a 3.3V logic signal 3m on a cable. Can I use this device to translate it to 5V and then re translate it back to 3.3V? It is used not a high speed signal. More…

  • over 6 years ago
  • Logic
  • Logic forum
Answered

• SN74LVC1T45: SN74LVC1T45 output is too much rising edge noise

  

  mai xue

  Resolved

  Part Number: SN74LVC1T45 SN74LVC1T45 output is too much rising edge noise.

  • Resolved

  • over 7 years ago
  • Logic
  • Logic forum

• SN74LVC1T45: Cal Prop 65 Declarations Specific to Each Part

  

  Katelyn Ramthun

  TI Thinks Resolved

  Part Number: SN74LVC1T45 I am needing Cal Prop 65 declarations for about 30 different parts. The generic TI declaration won't work as it doesn't specify which materials present are non-compliant. Where can I get these declarations or who can I contact…

  • over 5 years ago
  • Logic
  • Logic forum
Answered

• SN74LVC1T45: If SN74LVC1T45 is AUTO level

  

  HAIFENG YU

  Resolved

  Part Number: SN74LVC1T45 I want to using SN74LVC1T45 on AUTO project. So I want to know if this part is AUTO level. If not can you provide the part which can support AUTO to me? Many thanks!

  • Resolved

  • over 7 years ago
  • Logic
  • Logic forum
Answered

• SN74LVC1T45-Q1: VCC and I/O signal

  

  Liu Yang

  Resolved

  Part Number: SN74LVC1T45-Q1 Hi Team, When VCCB is on and VCCA is off, if signal input to VCCA side I/O A, is there any problem? When both VCCA and VCCB is on, if VCCA=1.8V while 3.3V signal input to VCCA side I/O A, is there any problem? Beat Regards…

  • Resolved

  • over 4 years ago
  • Logic
  • Logic forum

• SN74LVC1T45: 3.3V ⇒3.3V Output Error

  

  Zeming Kong

  TI Thinks Resolved

  Part Number: SN74LVC1T45 Hi there, My customer is evaluating SN74LVC1T45. It is used as a bidirectional buffer for SPI data transfer between CPU and FPGA. The schematic is like below. He noticed that when it worked as A ⇒ B, the output voltage of…

  • over 5 years ago
  • Logic
  • Logic forum
Answered

• SN74LVC1T45-Q1: Default state

  

  G pandi

  Resolved

  Part Number: SN74LVC1T45-Q1 Hi, In our project we are using SN74LVC1T45QDCKRQ1 Non inverting level shifter. In this chip with out providing any input what is the default state of the out pin ???? Thanks & Regards pandi

  • Resolved

  • over 5 years ago
  • Logic
  • Logic forum

• SN74LVC1T45-EP: Thermal Characteristics

  

  Dan Abbey

  TI Thinks Resolved

  Part Number: SN74LVC1T45-EP Hi Team, Please could you share the below to support an ongoing design using SN74LVC1T45MDCKREP: Junction to Board thermal resistance / Theta jB Junction to Case thermal resistance / Theta jC Thanks, Dan

  • over 5 years ago
  • Logic
  • Logic forum

Didn't find what you are looking for? Post a new question.