We do not specify a min/max for these parameters. Is the variation a concern for the application? if so, how?
The TLV62080 is a newer device that may be of interest instead.
For #1, the IC will for sure be operational when powered with a Vin within…
I recommend that a 2.2uH inductor be used for both rails.
Do they need/use the forced PWM mode feature? If not, the TLV62080 or TLV62565 are newer devices.
There's also the TPS62230 family for much smaller size and smaller and lower cost passives…
Other Parts Discussed in Thread: TLV713 Dear Sir/ Madam
We are working on Agriculture based Project in which we are using below Ti Part no.
Charge Controller : BQ24650
Fuel Gauge : BQ28z610
Power Regulator : TPS63020 ; TLV62080 ; TLV713
We…
Other Parts Discussed in Thread: BQ24650 Dear Sir/ Madam
We are working on Agriculture based Project in which we are using below Ti Part no.
Charge Controller : BQ24650
Fuel Gauge : BQ28z610
Power Regulator : TPS63020 ; TLV62080 ; TLV713
We…
Hello,
Can I get the information ?
Customer wants geber data.
If you need more information or if I should clarify my comment , please let me know.
Best Regards,
Yusuke.
Other Parts Discussed in Thread: TPS564201 , TPS56628 , TPS568230 , TPS566238 Power_Section_A0-01.pdf
Hi TI team, I have attached the schematics contains the power section of my new project. Can you please review these designs and provide necessary…
Part Number: TPS650830 Other Parts Discussed in Thread: TPS650832 Hi Sir
The customer follow that suggest from E2E(use a resistor divider from the 2.5V to 1.8V and connect to Vsb ), but customer can’t be turn on TPS650832.
http://e2e.ti.com/support…
Frank,
The Production Schematic (RevD) PDF (Rev. A) zip file has PCB layer prints but the K2GICE Production Schematic (RevD) Orcad Database DSN (Rev. A) has native schematic file. I have created PDF from this native file and attached here. We will correct…
Hello,
The UCC3806 is a dual output controller though it can be used in a flyback where only one of the outputs are used to drive the switch it might be better to choose a single output controller. Look at page 46 of the attached under General Purpose…
