Hi,
I have a Keystone II EVM (XTCIEVMK2X Rev 10) and I need to boot in hyp mode. In order to support hyp mode i did following changes in current u-boot source.
/* Start of patch */ diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start…
Part Number: MMWAVE-STUDIO Other Parts Discussed in Thread: DCA1000EVM , IWR1642 Hello.
I'm trying to get ADC raw data from IWR1642 with DCA1000EVM on my notebook (Windows 10 Enterprise). I'm using C:\ti\mmwave_studio_02_00_00_02\mmWaveStudio\Scripts…
TI folks,
We have developed a product based on the DM814x, using:
DM814x PG 3.0
EZSDK 5.05.02.00
EZSDK OMX/HDVPSS Overlay 5.05.02.00
PSP 04.04.00.02
Most of the Arago updates for both linux and u-boot in ti81xx-master after the v2.6.37_TI81XXPSP_04…
Hi all,
I'm just adding some thoughts on the issue:
The differences come from construction. BLDC's have concentrated stator windings, while PMSM's have distributed stator windings. The latter are more expensive for manufacture. Before anybody involved…
Here is the archived processors.wiki.ti.com page on the topic: /cfs-file/__key/communityserver-discussions-components-files/791/SYS_5F00_BIOS-with-GCC-_2800_CortexA_2900_-_2D00_-Texas-Instruments-Wiki.pdf
Filipe Alves49699 said:
I am implementing computer vision algorithms in the dm6446 processor. Specifically in the dm6446 EVM.
I am very pleased with the C64x+ DSP, unfortunately i cant say the same about the arm side.
The time it takes just to…
Hi Andy,
In order to clampt the gate voltage not lower than VIN-5V, a zener diode with a breakdown voltage lower than 5V but higher than the threshold of the PMOS can be used. But for the internal driver circuit design, DRV will be pulled down to VIN…
Other Parts Discussed in Thread: TFP410 Hi TI team,
I'm porting linux on my PCB. (MPU is AM4378BZDN100) I got a error message " [drm:omap_plane_error_irq] *ERROR* gfx: errors: 00000040 "
Could you suggest me any suggestions???
Thanks a lot.
Linux…
CarL:
What is the diffrence between PTN78020WAH and PTN78020WAD?There is no electrical or mechanical differences between WAD and WAH mechanical version. The WAD and WAH are bot lead (Pb) free>
If i have a load greater than the specified output current…
The receiver chain in the CC2530 is the same as in the CC2520. The CC2530 transmit chain is slightly different with a focus on low EVM, but from a range perspective, they perform pretty much the same.
0.7% PER (packet error rate) in the video is significant…
