Part Number: TMS320VC5507 Hello,
I am developing a product using TI's TMS320VC5507ZHH. I hope this part will be supplied continuously.
In this regard, I would like to ask you if this part is available continuously. If this part is not available, please…
Hi Lalindra, It was good news and it will help me in improving my projects in shorter time. But I have another related question. As you know C55XCSL-SPRC133 supports some devices such as C5501, C5502, C5509, C5509A, and C5510.Which device library should…
Part Number: TMS320VC5507
Hello,
According to TMS320VC5507/5509 DSP Universal Serial Bus (USB) Module Reference Guide, in Pin description table as shown in the image above, the value of resistor between PU and DP is 1.5 ohm, while the correct value…
Hi Nived,
Here is a link to official TMS320VC5507 software:
www.ti.com/.../toolssoftware
I suggest you to read linked below Debugging TMS320C55x tutorial to get jtag debugging experience:
www.tij.co.jp/.../spra841.pdf
Also please take a look…
Part Number: TMS320VC5507 Other Parts Discussed in Thread: TMS320VC5509A Hello,
As you can see in the picture below the data (read/write) address busses are 24 bit wide, while from spru317f we know that these busses are 23-bit wide which is suitable…
Part Number: TMS320VC5507 Other Parts Discussed in Thread: SM320VC5507-EP , TMS320VC5509A
Hi,
I think there is a similar mistake in TMS320VC5507 and TMS30VC5509 and SM320VC5507 datasheets with this literature numbers SPRS244J, SPRS163H, SPRS613. …
Part Number: TMS320VC5507
Hi,
Why this resistor and this capacitor is used in the image bellow?
This image is taken from Spectrum Digital DSK5509A schematics. J10 with 6 pins is a USB socket and the nets USB_D+ and USB_D- are connected to TMS320VC5507…
Part Number: TMS320VC5507 Tool/software: Code Composer Studio Hi
I'm trying to write my first assembly program for TMS320VC5507 DSP.
What does the problem attached to this post mean? And How could I solve it?
The emulator is XDS100V2
This is my…
Part Number: TMS320VC5507
Tool/software: Code Composer Studio
Hello,
I am working on a DSP board based on TMS320VC5507. Last but not least, I want to write gel file to complete this project. Would you please help me to solve my problem? Please…