Keven,
There are a variety of PMICs and power solutions which have been used for Netra, some of them include battery backed RTC.
Here are some potential solutions. Note, not all include a RTC.
TPS56221 TPS659112 TPS40400 TPS51315 TPS40322 TPS40041…
Other Parts Discussed in Thread: TPS40400 , PMP , TVP5158 Dear sir,
I used EMAC boot to download boot and uimage. Boot file is working fine but it is showing error message as "reading BMP image failed".
regards Balaji
U-Boot 2010.06 (Aug 07 2014…
Other Parts Discussed in Thread: TPS40400 , PMP , TVP5158 Dear Sir,
I have followed steps from 1.5.2.3 Using EMAC Boot in DM8168 DVR RDK Install Guide. I can load the uBoot and Uimage from TFTP server. I am getting error message as “ERROR: reading BMP…
Other Parts Discussed in Thread: TPS40400 Question: I am designing an audio amplifier using the TPA5710 for an application that requires a power supply to drive 25W per channel into an 8R load. I also need 3.3V for my system logic and 12V to support a…
Other Parts Discussed in Thread: SYSBIOS , TPS40400 My Environment:
hardware: our custom DM8168 borad
software: DVRRDK_03.50.00.05 , our APP base on MCFW;
Our APP is receive network realtime H.264 and AAC stream then input to MCFW to decode and…
Thank you for the swift reply.
When doing the rmmod I get an error;
root@dvr:~# rmmod syslink.ko ERROR: Module syslink is in use
I see that syslink is installed during linux boot:
UBOOT # boot
NAND read: device 0 offset 0x280000, size 0x300000…
Part Number: UCD9248 Other Parts Discussed in Thread: PTD08D210W Dear UCD9248 team:
I tried to reprogram UCD9248 with Manufacturing Tool back to factory defaults for VC707 boards.
But the GUI always stuck at the 'validating' and failed. Please see…
Part Number: TMS320DM8168 We manufactured around 30 TMS320DM8168 processor boards last year and the processor we purchased directly from TI in that 3 boards booting will stuck with attached console prints
When compared with working board console prints…
