Other Parts Discussed in Thread: TPS56121 art Number: TPS56121
Hi team,
Could you help me to find an appropriate value for inductor and loop compensation RC?
I'm trying to design TPS56121 in the operating condition of 10.8Vin, 5.5Vout, 2.8Aout…
Other Parts Discussed in Thread: TPS40400 , PMP , TVP5158 Hi all, I try to run DM8168 / DVRRDK_03.00.00.00 from an initrd, but we got problems: I can create the ram disk, Flash kernel und ramimage and start the kernel, but an error occurs if the initrd…
Chris Jensen
Have you been able to make the changes Yuchang Zhang suggested?
Have they addresses your issue?
The TPS40077 controller uses the KFF pin to provide UVLO, Voltage Feed Forward and a maximum duty cycles. The low resistance on the…
Part Number: TPS544C25 Hi team,
I searched E2E and found there is a post related to my question as below.
https://e2e.ti.com/support/power-management/f/196/t/433191?tisearch=e2e-sitesearch&keymatch=tps544c25%2525252525252520calculation
But I didn…
Hi Etta,
The input capacitor value looks reasonable.
As for output capacitor and inductor, you can double check with this calculator tool
1033.TPS40KType III Loop Stability kVenable_sluc263c-071312.xls
As for layout i see a good placement for…
Part Number: TPS40170 The tool does not yield the correct compensation values. I attempted to verify if I was doing something wrong by using the values from the TPS40170 reference design, but the values calculated by the Tool don't match the results on…
Other Parts Discussed in Thread: PCM1773 , TPS40400 , PMP , TMP75 , TVP5158 Hi guys,
Our applycation base on links of RDK01.09.00.06. And we add interface for links stop/del for applicaions.
Besides, we add running "unload.sh" under path: /opt/dvr_rdk…
