Part Number: TUSB216IEVM Could you provide me the full layer layout data of EVM?
Please send it to my e-mail.
Thanks in advance.
Regards,
Kyoichi OMATA
Part Number: TUSB216IEVM Other Parts Discussed in Thread: TUSB216 , TUSB216I Dear team,
I get your TUSB216IEVM demo board today, but seems it can’t work normally. No matter how I modify the BOOST and RX_SEN config, the test result are same, looks like…
Part Number: TUSB216IEVM Other Parts Discussed in Thread: TUSB216I , Hi team,
Customer uses TUSB216I to compensate signal quality and they need to use CDP.
Figure8-1 of the datasheet shows D1P and D2P (D1M and D2M as well) are shorted with CDP disabled…
Part Number: TUSB216-Q1 Other Parts Discussed in Thread: TUSB216IEVM , TUSB216 , TUSB216EVM Host PC has USB2.0 port and USB device supports only USB1.1
USB cable (about 2meter) locates in bad noise environment.
So, device's USB connection is unstable…
Ok, this likely won't impact your application, but as noted in Users Guide, there was an issue with how that external power was implemented on the TUSB217AEVM-BC since the resistor divider we used to drive the toggle input actually caused some backdriving…
