Part Number: TUSB321 Hi Team,
Since we need to validate DRP functionality on USB2.0 port, we are planning to connect to type C connector on the board. In order to implement DRP functionality, we are including TUSB321RWBR IC.
My question is, as we…
Part Number: TUSB321 Other Parts Discussed in Thread: TUSB320 Hello，
With the type A-C cable (USB 3.0 support), the DIR of the TUSB321 can be reversed normally when the C port is reversed; however, with the type C-C cable, the DIR can sometimes be reversed…
Part Number: TUSB321 Hello E2E,
On the TUSB321 datasheet, I saw a comment regarding USB Cables supported.
Type-C Specification 1.1 defines several cables, plugs and receptacles to be used to attach ports. The TUSB321
device supports all cables…
I don't think you understand what I mean. How to set the TUSB321 I_MODE_PIN in UFP mode, and how to set the TUSB321 FLT # _PIN when no external MCU is needed. Please look at my question again, thank you.
Part Number: TUSB321 Other Parts Discussed in Thread: HD3SS3212 Hi team,
my customer use TUSB321 and HD3SS3212IRKSR for USB3.0 to Type C, have below issues:
1. use wire of TypeC to Type C, connect devices and computer, the device can be recognized…
Part Number: TUSB321 Hi team,
If the PORT pin is leaved to be floated to act as Dual Role Port(DRP), and a voltage above VBUS_DET threshold is applied to the pin VBUS_DET . Would this make it to be a UFP(which means Rd to GND connected), despite the…
Part Number: TUSB321 Other Parts Discussed in Thread: TPS25910
SCHEMATIC1.pdf
The Type-C power supply solution is shown in the attachment. The Type-C interface is the uplink data transmission and power supply interface of the USB3.1 GEN2 HUB.…
Part Number: TUSB321 Hi Sir
My customer product is touch pen(UFP only, there doesn't need process data).
Currently find touch pen can't get power with active cable(E-Mark).(Passtive cable touch pen can sink power)
May we know if we can fixed that…
